You guys are all overlooking the fastest, easiest way to transfer the files from the Performa 6400 to the G4. Both of these machines use ATA/IDE hard drives. Oh, wait, Chris mentioned it already. It's pretty hard to beat Chris at this game!! :-D But rather than mess with jumper setting for the Master/slave deal, I say just do it like this:
1) shut both machines off, 2) remove the Hard drive from the Performna (after the front cover is pulled off from the bottom up, the Hd pulls straight out) 3) open the G4 & disconnect the CD, 4) connect the performa's hard drive in it's place. When you turn the G4 on, both HD's ought to appear, and you can 5) drag the files from one HD to the other. If you need more info on opening the Performa & doing the operation; visit http://www.xlr8yourmac.com/ or http://lowendmac.com/ or http://www.zone6400.com/ Hope this helps. Best, Dave Nathanson Mac Medix ___________________________________________________________________________ To unsubscribe send a mail message with a SUBJECT line of "unsubscribe" to <[EMAIL PROTECTED]> or <[EMAIL PROTECTED]>
