Hi good people, According to CE mark label requirement,
“The various components of the CE marking must have substantially the same vertical dimension, which may not be less than 5 mm.” But however, I’ve seen lots of products bearing CE logo which is definitely lesser than 5mm height. Such as some electronic products, toy product and on my desk a stationary highlighter, all which have CE mark of about 3mm height. Isn’t this deem not meeting to CE mark logo specs/requirement? Is there any cases of penalty that anyone can provide so that I could use it to show to our management guys. Thanks. Regards Koh - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
