Currently, Industry Canada will accept FCC test data for devices subject to ICES-003. I'd have your test lab provide you a test report for ICES-003 based on the FCC data. Also, be sure that your labeling and information to the user meet IC requirements. You mentioned Declaration of Conformity. DOC and DOC labeling is only applicable to some types of ITE.
Bill Stumpf D.L.S. Electronic Systems, Inc. EMC Testing & Consulting 166 South Carter Street Genoa City WI, 53128 262-279-0210 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient. If you are not the intended recipient, please be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please contact the sender and delete all copies. Thank you for your cooperation From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Monday, June 09, 2008 7:22 AM To: [email protected] Cc: [email protected] Subject: Re: ICES -003 approval for FCC DoC product No you don't. The latest version is ICES-003 2004 Issue 4. Actually the FCC will accept test data done to CISPR 22 (see CFR 47, Part 15.109 (g)). If the ITE device is an intentional radiator, then the testing site will have to be listed by the FCC and IC. Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 =========================================================== Kbalasubramanian@ scmmicro.co.in Sent by: To [email protected] [email protected] cc 06/09/2008 05:33 Subject AM ICES -003 approval for FCC DoC product Dear Experts, We have tested our ITE device for FCC Part15 Class B compliance in an NVLAP accredited lab. In the same lab for the same device we conducted testing for CISPR22 Class B compliance also. Based on these 2 reports we have issued DoC for placing the device in US & EU market. Now the same device we plan to sell in Canada. Do we need another testing or can we issue a DoC based on the FCC & CISPR reports. Sincerely SCM Microsystems (India) Pvt. Ltd. K. Balasubramanian Modules 0506, 0507 & 0508, D - Block, Manager - Hardware South Wing, TIDEL Park, Tel : +91 44 22540020 Ext : 305 #4, Rajiv Gandhi Road,(formerly Canal Bank Road) Fax :+91 44 22540029 Taramani, Chennai - 600113. India E-mail:[email protected] Web : http://scmmicro.com 'This email and any attachment may contain confidential information and are intended solely for the use of the named recipient(s). If you have received this information in error, you are prohibited from reading, copying, distributing and using the information. If you are not a named addressee or otherwise an intended recipient you are requested to immediately notify the sender and to delete this email and all attachments from your system.' - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
