This is because the standards are so similar, a test report for ICES003 is still required as well as everything else you mentioned.
Regards, Kevin Keegan Senior Associate KES & Associates 1 Stonecroft Terrace Kanata, Ontario Canada K2K 2V1 Tel: 613-592-0820 Email: [email protected] Web: http://www.kesandassociates.com Regulatory Approval Forum Chairperson IMPORTANT NOTICE: This email is intended only for the individual or entity to which it is specifically addressed and should not be read by, or delivered to, any other person. Such material may contain privileged or confidential information, the disclosure or other use of which by other than the intended recipient may result in the breach of certain laws or the infringement of rights of third parties. If you have received this email in error, please delete it immediately and notify the sender. I thank you in advance for your co-operation and assistance. On 9 Jun 2008 at 8:52, Bill Stumpf wrote: > Currently, Industry Canada will accept FCC test data for devices subject to > ICES-003. I'd have your test lab provide you a test report for ICES-003 based > on the FCC data. Also, be sure that your labeling and information to the user > meet IC requirements. You mentioned Declaration of Conformity. DOC and DOC > labeling is only applicable to some types of ITE. > > Bill Stumpf > D.L.S. Electronic Systems, Inc. > EMC Testing & Consulting > 166 South Carter Street > Genoa City WI, 53128 > 262-279-0210 > > > This e-mail and any attachments may contain confidential material for the > sole use of the intended recipient. If you are not the intended recipient, please be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please contact the sender and delete all copies. > > Thank you for your cooperation > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] > Sent: Monday, June 09, 2008 7:22 AM > To: [email protected] > Cc: [email protected] > Subject: Re: ICES -003 approval for FCC DoC product > > No you don't. The latest version is ICES-003 2004 Issue 4. > > Actually the FCC will accept test data done to CISPR 22 (see CFR 47, Part > 15.109 (g)). > > If the ITE device is an intentional radiator, then the testing site will have > to be listed by the FCC and IC. > > Bob Heller > 3M EMC Laboratory, 76-1-01 > St. Paul, MN 55107-1208 > Tel: 651- 778-6336 > Fax: 651-778-6252 > =========================================================== > > > > > Kbalasubramanian@ > scmmicro.co.in > Sent by: To > [email protected] [email protected] > cc > > 06/09/2008 05:33 Subject > AM ICES -003 approval for FCC DoC > product > > > > > > > > > > > Dear Experts, > We have tested our ITE device for FCC Part15 Class B compliance in an > NVLAP accredited lab. In the same lab for the same device we conducted testing for CISPR22 Class B compliance also. Based on these 2 reports we have issued DoC for placing the device in US & EU market. Now the same device we plan to sell in Canada. Do we need another testing or can we issue a DoC based on the FCC & CISPR reports. > > Sincerely SCM > Microsystems (India) Pvt. Ltd. > K. Balasubramanian Modules 0506, > 0507 & 0508, D - Block, > Manager - Hardware South Wing, TIDEL > Park, Tel : +91 44 22540020 Ext : 305 #4, Rajiv Gandhi Road,(formerly Canal Bank Road) Fax :+91 44 22540029 Taramani, Chennai - 600113. India E- mail:[email protected] Web : http://scmmicro.com 'This email and any attachment may contain confidential information and are intended solely for the use of the named recipient(s). If you have received this information in error, you are prohibited from reading, copying, distributing and using the information. If you are not a named addressee or otherwise an intended recipient you are requested to immediately notify the sender and to delete this email and all attachments from your system.' > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > > For policy questions, send mail to: > > Jim Bacher: [email protected] > David Heald: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > > For policy questions, send mail to: > > Jim Bacher: [email protected] > David Heald: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > > For policy questions, send mail to: > > Jim Bacher: [email protected] > David Heald: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > > -- > No virus found in this incoming message. > Checked by AVG. > Version: 7.5.524 / Virus Database: 270.1.0/1492 - Release Date: 6/9/2008 > 10:29 AM > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
