It is not automatic however (and I'm not implying that you implied that).
Among other items you will have to provide your NSA data.
Bob Heller
3M EMC Laboratory, 76-1-01
St. Paul, MN 55107-1208
Tel: 651- 778-6336
Fax: 651-778-6252
==============================================================
"Scott Drysdale"
<[email protected]
> To
[email protected]
06/09/2008 09:50 [email protected]
AM cc
Subject
Re: ICES -003 approval for FCC DoC
product
Good Afternoon,
To further Bobs comments, labs registered with the FCC may already be
registered with Industry Canada. The requirements are virtually identical,
and I don't remember a filing fee for registration.
You can check here:
http://strategis.ic.gc.ca/app/sitt/testFacilities/launchIndex.do?TF_ACTION=TF_INDEX&templateKey=SITT_TESTFACILITIES&TF_TYPE=1&TF_LANG=eng
Best Regards,
Scott Drysdale
OOO - Own Opinions Only
>------- Original Message Follows -------
>From: [email protected]
>To: <[email protected]>
>Cc:
>Subject: Re: ICES -003 approval for FCC DoC product
>Date: Mon, 9 Jun 2008 07:22:04 -0500
>
>No you don't. The latest version is ICES-003 2004 Issue 4.
>
>Actually the FCC will accept test data done to CISPR 22 (see CFR 47, Part
>15.109 (g)).
>
>If the ITE device is an intentional radiator, then the testing site will
>have to be listed by the FCC and IC.
>
>Bob Heller
>3M EMC Laboratory, 76-1-01
>St. Paul, MN 55107-1208
>Tel: 651- 778-6336
>Fax: 651-778-6252
>===========================================================
>
>
>
>
> Kbalasubramanian@
> scmmicro.co.in
> Sent by: To
> [email protected] [email protected]
> cc
>
> 06/09/2008 05:33 Subject
> AM ICES -003 approval for FCC DoC
> product
>
>
>
>
>
>
>
>
>
>
>Dear Experts,
> We have tested our ITE device for FCC Part15 Class B compliance in
an
>NVLAP accredited lab. In the same lab for the same device we conducted
>testing for CISPR22 Class B compliance also. Based on these 2 reports we
>have issued DoC for placing the device in US & EU market. Now the same
>device we plan to sell in Canada. Do we need another testing or can we
>issue a DoC based on the FCC & CISPR reports.
>
>Sincerely SCM
>Microsystems (India) Pvt. Ltd.
>K. Balasubramanian Modules 0506,
>0507 & 0508, D – Block,
>Manager – Hardware South Wing,
>TIDEL Park,
>Tel : +91 44 22540020 Ext : 305 #4, Rajiv Gandhi
>Road,(formerly Canal Bank Road)
>Fax :+91 44 22540029 Taramani,
>Chennai – 600113. India
>E-mail:[email protected] Web : http://scmmicro.com
>‘This email and any attachment may contain confidential information and
are
>intended solely for the use of the named recipient(s). If you have
received
>this information in error, you are prohibited from reading, copying,
>distributing and using the information. If you are not a named addressee
or
>otherwise an intended recipient you are requested to immediately notify
the
>sender and to delete this email and all attachments from your system.’
>
>-
>----------------------------------------------------------------
>This message is from the IEEE Product Safety Engineering Society
>emc-pstc discussion list. Website: http://www.ieee-pses.org/
>
>To post a message to the list, send your e-mail to [email protected]
>
>Instructions: http://listserv.ieee.org/request/user-guide.html
>
>List rules: http://www.ieee-pses.org/listrules.html
>
>For help, send mail to the list administrators:
>
> Scott Douglas [email protected]
> Mike Cantwell [email protected]
>
>For policy questions, send mail to:
>
> Jim Bacher: [email protected]
> David Heald: [email protected]
>
>All emc-pstc postings are archived and searchable on the web at:
>
> http://www.ieeecommunities.org/emc-pstc
>
>-
>----------------------------------------------------------------
>This message is from the IEEE Product Safety Engineering Society
>emc-pstc discussion list. Website: http://www.ieee-pses.org/
>
>To post a message to the list, send your e-mail to [email protected]
>
>Instructions: http://listserv.ieee.org/request/user-guide.html
>
>List rules: http://www.ieee-pses.org/listrules.html
>
>For help, send mail to the list administrators:
>
> Scott Douglas [email protected]
> Mike Cantwell [email protected]
>
>For policy questions, send mail to:
>
> Jim Bacher: [email protected]
> David Heald: [email protected]
>
>All emc-pstc postings are archived and searchable on the web at:
>
> http://www.ieeecommunities.org/emc-pstc
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
