Bonjour à Tous, For test site registration, you only have to do that with Industry Canada if you test transmitters.
For "non-intentional" radiators you don't need to register your site. Also ICES-003 is a regulatory document; it is not a testing procedure. CAN/CSA CISPR 22 is the testing standard but if you have a test report that is written around CISPR 22 it would be acceptable for Industry Canada. Since there is no requirement in Canada that the laboratory has to be accredited, the MRA requirements for non-intentional radiators testing do not apply as it would be the case for a Declaration of Conformity according to the FCC regulations. Regards, ========================================== Benoit Nadeau, ing. M.ing. Gérant du Groupe Conformité (Conformity Group Manager) Matrox 1055 boul. St-Régis Dorval (Québec) Canada H9P 2T4 Tél: (514) 822-6000 (2475) FAX: (514) 822-6275 [email protected] www.matrox.com ========================================== From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Monday, June 09, 2008 10:56 AM To: [email protected] Subject: Re: ICES -003 approval for FCC DoC product It is not automatic however (and I'm not implying that you implied that). Among other items you will have to provide your NSA data. Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 ============================================================== "Scott Drysdale" <[email protected] > To [email protected] 06/09/2008 09:50 [email protected] AM cc Subject Re: ICES -003 approval for FCC DoC product Good Afternoon, To further Bobs comments, labs registered with the FCC may already be registered with Industry Canada. The requirements are virtually identical, and I don't remember a filing fee for registration. You can check here: http://strategis.ic.gc.ca/app/sitt/testFacilities/launchIndex.do?TF_ACTION=T F_INDEX&templateKey=SITT_TESTFACILITIES&TF_TYPE=1&TF_LANG=eng Best Regards, Scott Drysdale OOO - Own Opinions Only >------- Original Message Follows ------- >From: [email protected] >To: <[email protected]> >Cc: >Subject: Re: ICES -003 approval for FCC DoC product >Date: Mon, 9 Jun 2008 07:22:04 -0500 > >No you don't. The latest version is ICES-003 2004 Issue 4. > >Actually the FCC will accept test data done to CISPR 22 (see CFR 47, Part >15.109 (g)). > >If the ITE device is an intentional radiator, then the testing site will >have to be listed by the FCC and IC. > >Bob Heller >3M EMC Laboratory, 76-1-01 >St. Paul, MN 55107-1208 >Tel: 651- 778-6336 >Fax: 651-778-6252 >=========================================================== > > > > > Kbalasubramanian@ > scmmicro.co.in > Sent by: To > [email protected] [email protected] > cc > > 06/09/2008 05:33 Subject > AM ICES -003 approval for FCC DoC > product > > > > > > > > > > >Dear Experts, > We have tested our ITE device for FCC Part15 Class B compliance in an >NVLAP accredited lab. In the same lab for the same device we conducted >testing for CISPR22 Class B compliance also. Based on these 2 reports we >have issued DoC for placing the device in US & EU market. Now the same >device we plan to sell in Canada. Do we need another testing or can we >issue a DoC based on the FCC & CISPR reports. > >Sincerely SCM >Microsystems (India) Pvt. Ltd. >K. Balasubramanian Modules 0506, >0507 & 0508, D Block, >Manager Hardware South Wing, >TIDEL Park, >Tel : +91 44 22540020 Ext : 305 #4, Rajiv Gandhi >Road,(formerly Canal Bank Road) >Fax :+91 44 22540029 Taramani, >Chennai 600113. India >E-mail:[email protected] Web : http://scmmicro.com >This email and any attachment may contain confidential information and are >intended solely for the use of the named recipient(s). If you have received >this information in error, you are prohibited from reading, copying, >distributing and using the information. If you are not a named addressee or >otherwise an intended recipient you are requested to immediately notify the >sender and to delete this email and all attachments from your system. > >- >---------------------------------------------------------------- >This message is from the IEEE Product Safety Engineering Society >emc-pstc discussion list. Website: http://www.ieee-pses.org/ > >To post a message to the list, send your e-mail to [email protected] > >Instructions: http://listserv.ieee.org/request/user-guide.html > >List rules: http://www.ieee-pses.org/listrules.html > >For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > >For policy questions, send mail to: > > Jim Bacher: [email protected] > David Heald: [email protected] > >All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > >- >---------------------------------------------------------------- >This message is from the IEEE Product Safety Engineering Society >emc-pstc discussion list. Website: http://www.ieee-pses.org/ > >To post a message to the list, send your e-mail to [email protected] > >Instructions: http://listserv.ieee.org/request/user-guide.html > >List rules: http://www.ieee-pses.org/listrules.html > >For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > >For policy questions, send mail to: > > Jim Bacher: [email protected] > David Heald: [email protected] > >All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
