But what standards apply in order "to carry a CE mark in its own right for EMC"?
>From what I understand, a smart battery is tested to the EMC standard that covers the equipment that it is installed in. What I am not clear on is the EMC standards that apply to testing smart batteries on their own (evidently MilStd 461 is one though). Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651-778-6336 Fax: 651-778-6252 ================================= From: John Woodgate <[email protected]> To: [email protected] Date: 08/23/2012 03:31 PM Subject: Re: [PSES] "Smart" Batteries Sent by: [email protected] In message <cc5bf2b9.2b66e%[email protected]>, dated Thu, 23 Aug 2012, Ken Javor <[email protected]> writes: >And that is what my post addressed by stating that the battery during >test is performing its intrinsic function of storing and dispensing >electrical energy. OK, all that means is that in Europe it has to carry a CE mark in its own right for EMC as well as for any other applicable Directives. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk Instead of saying that the government is doing too little, too late or too much, too early, say they've got is exactly right, thus throwing them into total confusion. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
