In message
<blupr02mb1169506aba5d6abb9e7b9e3c1...@blupr02mb116.namprd02.prod.outlook
.com>, dated Thu, 23 Jul 2015, Brian Oconnell <[email protected]>
writes:
No. And is dependent on converter topology and operating conditions and
whims of the Klingon High Command.
Since the supply current is (nearly) sinusoidal, I suppose that the
leakage current through the 'hot' Y-cap is sinusoidal, but the current
due to the capacitance to ground of the switching device's heat sink
(and maybe other parts) is not sinusoidal and may not be negligible.
--
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
When I turn my back on the sun, it's to look for a rainbow
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
