Hi All;
1- I installed the Live-Disk EMC 2.3.0 to do some comparisons
of my .ini and .hal files. When I turned the system on this morning
the EMC was upgraded to 2.3.5.
How do I stop that and re enable it later?
2- I lost the link to the instructions for upgrading to
EMC 2.4.2 and force loading earlier version of EMC.
3- While checking the G00 move speed on the Z axis
with the pertinent .ini settings below;
EMC 2.3.0 G00 moves the Z axis approximately 60 inches /minute.
EMC 2.3.5 and 2.4.2 G00 moves the Z axis approximately 15 inches /minute.
Feed is set f100 but shouldn't matter.
[TRAJ]
AXES = 3
COORDINATES = X Z
HOME = 0 0 0
LINEAR_UNITS = inch
ANGULAR_UNITS = degree
CYCLE_TIME = 0.010
DEFAULT_VELOCITY = 1.0
MAX_VELOCITY = 1.0
DEFAULT_ACCELERATION = 1000.
MAX_ACCELERATION = 1000.
POSITION_FILE = position.txt
[AXIS_0]
TYPE = LINEAR
MAX_VELOCITY = .25
MAX_ACCELERATION = 500.0
[AXIS_2]
TYPE = LINEAR
MAX_VELOCITY = 1.75
MAX_ACCELERATION = 800.0
Does anyone see or know the problem?
Thanks
Don
------------------------------------------------------------------------------
The Palm PDK Hot Apps Program offers developers who use the
Plug-In Development Kit to bring their C/C++ apps to Palm for a share
of $1 Million in cash or HP Products. Visit us here for more details:
http://p.sf.net/sfu/dev2dev-palm
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
