Hi Dave:
On Sat, Jul 31, 2010 at 2:05 PM, Dave <[email protected]> wrote:
>
> I just turn off the update manager and tell it to never check etc. I'm
> not big into things updating software when I am not looking.. ;-)
>
I am 100% with you on that. In fact I'm not into updates when I am
looking unless there is a new feature I require. I had the manager
flagged to notify only, but apparently that doesn't apply to third party
software. I will know later, all that is off now.
>
> I can't address the differences between versions that you have found
> but....
>
It was Kicked in on EMC 2.3.5. On a whim I checked to see if the X (axis 0)
controlled the max speed for all axis. Apparently it does.
>
> Why is the max velocity of your Axis 0 .... .25 inches per second,
> while your max for Axis 2 is 1.75 inches per second and your trajectory
> max velocity is 1.0 inches per second?
>
It's a servo Lathe. The X axis is the cutter feed into the material plus
the slow speed lets the servo track more accurately. Plus at .25" per
second on large diameters you are cutting threads rather than facing.
The 1.75 inch was a quick test to be sure I was above the max
>
> Your X axis is slow but your Z is fast? That seems rather odd.
>
Z axis is the long horizontal axis on the lathe (simular to the X on a
mill).
>
> Not knowing anything else, I'd probably bump up your X and Z velocity
> and limit the overall Traj velocity via the Traj max velocity.
>
> Keeping in mind that I am not really answering your question ..... :-)
>
Two out of three. Not bad for not answering Dave.
Thanks
Don
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
------------------------------------------------------------------------------
The Palm PDK Hot Apps Program offers developers who use the
Plug-In Development Kit to bring their C/C++ apps to Palm for a share
of $1 Million in cash or HP Products. Visit us here for more details:
http://p.sf.net/sfu/dev2dev-palm
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
