Don Stanley wrote: > 3- While checking the G00 move speed on the Z axis > with the pertinent .ini settings below; > EMC 2.3.0 G00 moves the Z axis approximately 60 inches /minute. > EMC 2.3.5 and 2.4.2 G00 moves the Z axis approximately 15 inches /minute. > Feed is set f100 but shouldn't matter. > > [TRAJ] > LINEAR_UNITS = inch > DEFAULT_VELOCITY = 1.0 > MAX_VELOCITY = 1.0 > DEFAULT_ACCELERATION = 1000. > MAX_ACCELERATION = 1000. > > [AXIS_0] > TYPE = LINEAR > MAX_VELOCITY = .25 > MAX_ACCELERATION = 500.0 > You have your X axis set for a maximum velocity of .25 inch/second, or 15 IPM. Not sure exactly why this affects Z also. Also, do you have any idea how much acceleration 1000 inches/second^2 is ? I use numbers around 3-5.
Jon ------------------------------------------------------------------------------ The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details: http://p.sf.net/sfu/dev2dev-palm _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
