I just turn off the update manager and tell it to never check etc. I'm not big into things updating software when I am not looking.. ;-)
I can't address the differences between versions that you have found but .... Why is the max velocity of your Axis 0 .... .25 inches per second, while your max for Axis 2 is 1.75 inches per second and your trajectory max velocity is 1.0 inches per second? Your X axis is slow but your Z is fast? That seems rather odd. Not knowing anything else, I'd probably bump up your X and Z velocity and limit the overall Traj velocity via the Traj max velocity. Keeping in mind that I am not really answering your question ..... :-) Dave On 7/31/2010 1:04 PM, Don Stanley wrote: > Hi All; > 1- I installed the Live-Disk EMC 2.3.0 to do some comparisons > of my .ini and .hal files. When I turned the system on this morning > the EMC was upgraded to 2.3.5. > How do I stop that and re enable it later? > > 2- I lost the link to the instructions for upgrading to > EMC 2.4.2 and force loading earlier version of EMC. > > 3- While checking the G00 move speed on the Z axis > with the pertinent .ini settings below; > EMC 2.3.0 G00 moves the Z axis approximately 60 inches /minute. > EMC 2.3.5 and 2.4.2 G00 moves the Z axis approximately 15 inches /minute. > Feed is set f100 but shouldn't matter. > > [TRAJ] > AXES = 3 > COORDINATES = X Z > HOME = 0 0 0 > LINEAR_UNITS = inch > ANGULAR_UNITS = degree > CYCLE_TIME = 0.010 > DEFAULT_VELOCITY = 1.0 > MAX_VELOCITY = 1.0 > DEFAULT_ACCELERATION = 1000. > MAX_ACCELERATION = 1000. > POSITION_FILE = position.txt > > > [AXIS_0] > TYPE = LINEAR > MAX_VELOCITY = .25 > MAX_ACCELERATION = 500.0 > > > [AXIS_2] > TYPE = LINEAR > MAX_VELOCITY = 1.75 > MAX_ACCELERATION = 800.0 > > Does anyone see or know the problem? > > Thanks > Don > ------------------------------------------------------------------------------ > The Palm PDK Hot Apps Program offers developers who use the > Plug-In Development Kit to bring their C/C++ apps to Palm for a share > of $1 Million in cash or HP Products. Visit us here for more details: > http://p.sf.net/sfu/dev2dev-palm > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details: http://p.sf.net/sfu/dev2dev-palm _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
