2011/4/30 Peter C. Wallace <[email protected]>: > > The easiest thing is to start with the example configurations, if you just > select hm2-stepper/7i43-big (if you have a 400K 7I43) from the EMC menus, that > should load the appropriate firmware and start EMC. If it does not, there is > an interface issue. Pinouts are determined by the bitfile so if you need a > different pinout you need a different bitfile (you can selectively enable > encoder/stepgens/pwmgens etc and pins unused (by these special functions) > revert to GPIO pins
I somehow skipped the fact that there is such a sample config available. Thanks!!! That is a really good place to start endeed :) Viesturs ------------------------------------------------------------------------------ WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
