Hello, folks! I wanted to ask, if there is some nice place with a sample configs for 7I43 card? Tomorrow might be the day, when I would like to get some movement in the newly built robotic arm, but I just realized, that I have not yet found out, how to set up the 7I43 card - this is my first time trying to use Mesa hardware. I found these pages: http://linuxcnc.org/docs/html/drivers_hostmot2.html http://linuxcnc.org/docs/html/man/man9/hostmot2.9.html http://www.linuxcnc.org/docview/html/man/man9/hm2_7i43.9.html
The thing is that I still do not understand, how exactly should I load hostmot driver for 7I43 card. http://linuxcnc.org/docs/html/drivers_hostmot2.html and http://linuxcnc.org/docs/html/man/man9/hostmot2.9.html say that I should: loadrt hostmot2 loadrt hm2_pci config="firmware=hm2/5i20/SVST8_4.BIT num_encoders=3 num_pwmgens=3 num_stepgens=1" The second line is confusing me - I do not understand, how exactly that "firmware" section is created. I am particularly afraid of that SVST8_4.BIT phrase. That page tells that it is some file name, but I am obviously missing something. But http://www.linuxcnc.org/docview/html/man/man9/hm2_7i43.9.html suggests: loadrt hm2_7i43 [ioaddr=N] [ioaddr_hi=N] [epp_wide=N] [config="str[,str...]"] [debug_epp=N] So does it mean that this last line substitutes the second line of the previous code? I think that no, because this last line does not state, how many stepgens should be created etc. So this page also does not provide full information. So can anyone share some sample HAL file for 7I43 card? Or at least point me to some noob tutorial, how to set it up? I _think_ that I might be able to figure out the correct syntax for different pins on the board and link them accordingly, currently I see difficulties in understanding, how to get EMC2 to communicate with the board. Thanks in advance! Viesturs ------------------------------------------------------------------------------ WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
