On 17 October 2016 at 17:17, Mark Johnsen <m...@ijohnsen.com> wrote: > The problem w/ continuous flex is that it's very expensive. So, you need > to ask yourself if it's worth it? Usually, I end up going w/ normal cable > and in this case, some ethernet cable as suggested might work okay
I would be concerned about oil resistance with conventional Ethernet. I used this for my lathe build (for smart-serial cables) https://www.rapidonline.com/lappkabel-2170489-unitronic-ethernet-blue-data-cable-4x2x0-12mm-od-6-3mm-49-1790 -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users