I linked the encoder index enable pin in hal to the index enable pin of the stengen. Is this ok?
My physical encoder index wires are connected to the encoder ports of the 7i95. El lun, 3 mar 2025 a las 15:33, Peter Wallace (<p...@mesanet.com>) escribió: > > >The issue is, when I activate the HOME_USE_INDEX option the machine > >absolute coordinate shows like -500 mm or something instead of 0 at the > >moment of the final detection. So the machine moves to the 0 position > after > >triggering the index pulse. This shouldn't happen because I have both HOME > >OFFSET and HOME POSITION set to 0. > > Are you using stepgen or encoder feedback? > > If you use stepgen feedback, no encoder pins should be used at all > > (you example showed you using both) > > Peter Wallace > Mesa Electronics > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
