On Mon, 10 Aug 2026, Viesturs L?cis wrote:
Took a little longer than previously, but still the same. I started filming
before pressing 'enter' on last command:
https://photos.app.goo.gl/Ke2ta4Dj8vbpH9r97
Viesturs
Unfortunately I cannot see the video
( just says "Your video will be ready soon" forever )
Maybe a PCI incompatibility, but that seems unlikely because there are
hundreds of PCI/PCIE accesses to register the card.
Is secure boot disabled
What PCI bios options doe the PC have?
Peter Wallace <[email protected]> (?aj? datum?: pirmd., 2026. g. 10. aug.
21:04) rakst?ja:
On Mon, 10 Aug 2026, Viesturs L?cis wrote:
> LinuxCNC version 2.9.10, ISO file downloaded last wednesday
>
>
> Viesturs
Just asking because there were some recent changes in master
To narrow down the issue, you might try setting
the PWM with halcmd:
halcmd -kf
loadrt hostmot2
loadrt hm2_pci
loadrt threads
addf hm2_5i24.0.read thread1
addf hm2_5i24.0.write thread1
start
setp hm2_5i24.0.pwmgen.00.enable true
setp hm2_5i24.0.pwmgen.00.value .5
>
> Peter Wallace <[email protected]> (?aj? datum?: pirmd., 2026. g. 10. aug.
> 20:10) rakst?ja:
>
>>
>>
>> Very strange
>>
>> What LinuxCNC verion?
>
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
