> > > I have recently upgraded my equipment from a 16 year old T-50 to > an �lan 7e > and when I compose my shots I try to fill the frame of the viewfinder. I > don't have a quality lab nearby so i have used thus far the local 1 hour > guys. When my pictures come back the negatives are framed nicely but the > prints have parts of the images chopped off. Am I framing to tight in the > viewfinder or is the lab not giving me a quality job? I get 4x6 prints > which i have read is the same size ratio as 35 mm frames so I would think > the prints should be framed in a similar fashion the the neg. > I'm thinking > I need to find a pro lab even if it's a bit of a drive. > > Thanks for any input... :) >
Hi Bob, A full 35mm frame is slightly wider than your 4x6 print so the sides usually get chopped off at a lab that uses a minilab machine. You could ask them to print full frame or ask them to always crop from one side or the other and they may be able to make it work for you. HTH Regards, Chip Louie * **** ******* *********************************************************** * For list instructions, including unsubscribe, see: * http://www.a1.nl/phomepag/markerink/eos_list.htm ***********************************************************
