----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hi Charlie!
This may sound a little simple but.... Did you use different
screws when you put the compass
back
in? Should be brass.Steel screws close by will put it out. No new
electrical wires close by??? Just a
thought.
Darwin
Charlie Reno wrote:
> ----[Please read http://ercoupers.com/disclaimer.htm before following
any advice in this forum.]----
>
> My compass developed a leak and I lost 10% of the damping fluid.
> We had it sent out for repair and when it came back, it would not
indicate
> properly during the swinging in calibration adjustment tests. OK on all
> directions but west - off 19deg. Upon removal of radios, it was only off
> 16deg. Next, we tried a brand new compass and it, too, gave bad
behavior.
>
> Has anyone had any experience with such a problem? I would greatly
> appreciate any useful suggestions to get the compass to swing test and
> behave properly.
> Thanks
> Charlie, N6363V at CGF
>
>
==========================================================================
====
> To leave this forum go to: http://ercoupers.com/lists.htm
> Search the archives on http://escribe.com/aviation/coupers-tech/
==========================================================================
====
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers/
<<attachment: winmail.dat>>
