Any update? On Tue, Dec 9, 2008 at 7:19 PM, Hobin Yoon <[email protected]> wrote:
> Here it is. > > # ethercat config -v > Alias: 0 > Position: 0 > Vendor Id: 0x00000002 > Product code: 0x04570862 > Attached slave: 0 (OP) > SM0 (Output) > Pdo 0x1a00 > Pdo entry 0x3101:01, 8 bit > SM1 (Output) > Pdo 0x1a01 > Pdo entry 0x3101:02, 8 bit > SM2 (Input) > Pdo 0x1600 > Pdo entry 0x3001:01, 8 bit > Pdo 0x1601 > Pdo entry 0x3001:02, 8 bit > Sdo configuration: > None. > > Regards, > Hobin Yoon > > On Tue, Dec 9, 2008 at 6:25 PM, Florian Pose <[email protected]> wrote: > >> On Tue, Dec 09, 2008 at 06:11:10PM +0900, Hobin Yoon wrote: >> > # ethercat slave -v >> > === Slave 0 === >> > ... >> >> Ok, the slave does not support CoE, so the PDOs can not be configured by >> the master. >> >> > # ethercat config -v >> > (nothing... correct?) >> >> Sorry, this is only applicable with a loaded application. Could you >> repeat that? >> >> -- >> Best regards, >> Florian Pose >> >> http://etherlab.org >> _______________________________________________ >> etherlab-users mailing list >> [email protected] >> http://lists.etherlab.org/mailman/listinfo/etherlab-users >> > >
_______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
