These things are not hugely expensive.  For example, check out this:

http://www.kta-ev.com/Crash_Sensor_Inertia_Switch_p/fcs1%20520fcs01-01.htm

I would think the better option would be to just buy a new one rather than
risk the integrity of a salvaged one.

- Peter Flipsen Jr



On Fri, Feb 22, 2013 at 12:29 PM, Cor van de Water <[email protected]>wrote:

> Typical way to use that switch is to wire it in the circuit that
> engages the pack contactor coil (so, a 12V circuit!).
> If the switch opens after an accident, the high voltage from
> the pack is interrupted because the contactor(s) drop out.
>
> Hope this halps,
>
> Cor van de Water
> Chief Scientist
> Proxim Wireless Corporation http://www.proxim.com
> Email: [email protected] Private: http://www.cvandewater.info
> Skype: cor_van_de_water Tel: +1 408 383 7626
>
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On
> Behalf Of Ds2inc
> Sent: Thursday, February 21, 2013 5:14 PM
> To: Electric Vehicle Discussion List
> Subject: [EVDL] Inertia switch
>
> Can the existing inertia switch on a donor be used in an ev conversion?
>
> Sent from my iPhone
> _______________________________________________
> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> http://lists.evdl.org/listinfo.cgi/ev-evdl.org
> For EV drag racing discussion, please use NEDRA
> (http://groups.yahoo.com/group/NEDRA)
>
> _______________________________________________
> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> http://lists.evdl.org/listinfo.cgi/ev-evdl.org
> For EV drag racing discussion, please use NEDRA (
> http://groups.yahoo.com/group/NEDRA)
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130222/373da91d/attachment.htm>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA 
(http://groups.yahoo.com/group/NEDRA)

Reply via email to