Does indeed thank you for the info!!!!!!
Sent from my iPhone On Feb 22, 2013, at 11:29 AM, "Cor van de Water" <[email protected]> wrote: Typical way to use that switch is to wire it in the circuit that engages the pack contactor coil (so, a 12V circuit!). If the switch opens after an accident, the high voltage from the pack is interrupted because the contactor(s) drop out. Hope this halps, Cor van de Water Chief Scientist Proxim Wireless Corporation http://www.proxim.com Email: [email protected] Private: http://www.cvandewater.info Skype: cor_van_de_water Tel: +1 408 383 7626 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ds2inc Sent: Thursday, February 21, 2013 5:14 PM To: Electric Vehicle Discussion List Subject: [EVDL] Inertia switch Can the existing inertia switch on a donor be used in an ev conversion? Sent from my iPhone _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA) _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA) _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
