This message is from the T13 list server.
Well it is more like half and half. The host driver protocol works the same (for the most part). What has changed is where you stuff the taskfile registers with the ACB. So the points are split, but it will not work with direct legacy registers if you are going the use all of SATA I. Cheers, Andre Hedrick LAD Storage Consulting Group On Sun, 15 Dec 2002, Gary Laatsch wrote: > This message is from the T13 list server. > > > Nor mine.....but the spec says it is so it must be us.....:-) > > gary laatsch > [EMAIL PROTECTED] > > ----- Original Message ----- > From: "Hale Landis" <[EMAIL PROTECTED]> > To: "T13" <[EMAIL PROTECTED]> > Sent: Sunday, December 15, 2002 12:30 PM > Subject: RE: [t13] FW: Transfer of SATA 1.0 spec to T13 > > > > This message is from the T13 list server. > > > > > > On Fri, 13 Dec 2002 21:26:27 -0800, Edwin J. Pole II wrote: > > >This message is from the T13 list server. > > > > > >SATA is for inside the box, SW COMPATIBLE operation. > > > > Not my experience so far looking at the PCI config space data for at > > least one of those new SATA/PATA PCI add-in boards. > > > > > > > > *** Hale Landis *** www.ata-atapi.com *** > > > > > > > > >
