At 8:16 -0500 18/11/02, Chuck Leavens wrote: >My issue now is getting the box to power up. My first thought was the >power reset and cuda switch. Power reset does not help and I cannot >find a cuda SW. PS as well as motherboard have been changed.
Did you check the Pram battery? [snipped from the service manual] The Cuda reset button is at the edge of the logic board near the PCI slots. [another snip from the same source] Resetting the Logic Board Resetting the logic board can resolve many system problems (refer to "Symptom Charts" for examples). Whenever you have a unit that fails to power up, you should follow this procedure before replacing any modules. 1 Unplug the computer. 2 Remove the battery from the logic board. 3 Disconnect the power supply cable from the logic board and then press the Power On button. (See "Logic Board Diagram" later in this chapter to locate the Power On button.) 4 Wait at least 10 minutes before replacing the battery. 5 Make sure the battery is installed in the correct +/- direction. Tina *^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^* Tina Holm, Pederstrup Djurs, DK. MacTivist. Scandinavian Mac Mailinglist - Danish, Norwegian and Swedish Subscribtion: mailto:[EMAIL PROTECTED] Tons of somewhat outdated Maclinks: http://www.nehaia.dk/mac *^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^*^^* -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
