----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
When the primer is hard to get out, it helps if you give the knob a half turn, lining up the pin with the slot, and then pull again. On a less serious note, the only way the mogas will screw up the O-rings is if it has alcohol in it. If it does, the primer could be the least of your problems. More than likely that an O-ring is screwed up, and obstructing the pump. Don't know if the primer line is large enough to let an obstruction through that would be large enough to block something in the carb, but I doubt it. Fact is, I don't even know if the darned thing goes into the carb. Oh Well. Larry ----- Original Message ----- From: "dennis spiegel" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, February 17, 2002 5:06 PM Subject: [COUPERS] primer > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > Hi Ya'all coupers.I had a great day flying with a T34 > doing acrobatics I stayed pretty clear of him and > watched from the air as he told me what he was going > to do.HOW KOOOL.I got to 6500' or so to watch and stay > clear. What a time I had. > I had a slight problem with my primer b4 going. it > wouldn't come out. it was and IS stuck I sprayed it > with a silcone spray to see if that would work NO it > did not.I can't remember what brand it is but I'm > thinking the O rings dried out swelled up or sumthin > this sucker won't budge I'm afraid I'll break it.I > finally got it out but getting back was VERY > hard.Iwonder if my Mo gas did it screwed up the rubber > But I'm STC"D for it what do you think?? > Dennis 99564 in ILL Was it winter yet??Are we gunna > get dumped on here in the midwest????Mildest I can > ever remember!!! > > __________________________________________________ > Do You Yahoo!? > Yahoo! Sports - Coverage of the 2002 Olympic Games > http://sports.yahoo.com > > > ==^================================================================ This email was sent to: [EMAIL PROTECTED] EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
