Attach a screen grab of your current settings (along with type and
version of the OS, and version of gnc) for auto save as that seems to
be incorrectly set. This will allow folks here to weigh in.
From what you are saying, it seems like you have done the opposite of
what is required to auto-save.
The main pertinent setting I can see (others can keep me honest here)
is “Show auto-save confirmation question.” and if you “checked” that
then it is doing exactly as it says – its prompting you to save; not
automagically save. Secondary important settings for auto-save are
the “Auto-save time interval” which should be set reasonable (I keep
it at 5 mins) and “Retain log/backup files” which should be set
reasonable as well (I keep it at 10 days) but this will consume more
disk space. None of these time intervals should be less than one if
you want them to be effective.
If you have checked “Enable timeout on ‘Save changes on exit’
question” set to value greater than 1 then it is waiting that many
seconds with a prompt when quitting the program (which is what
Windows reboot will do – graceful shutdown of the application before
killing the process) before it will exit **without** saving if you
don’t respond within that time period. This is what your system seems
to be configured for doing.
Also if you know that M$ is installing updates in the background
without your knowledge, you can either run the computer off the
network (by pulling the cord out from the network card) and prevent
that or why leave any application open and running without saving
anything when you know that for fact? I get that some of the
commercial apps (such as M$ Office) have ability to pick up from
where you left off after reboot but that is not true of the entire
universe of apps. You are looking to invite trouble if you are doing
that as it is not the best practice to leave any app open with data
files still in use.
*From:*scum buster <[email protected]>
*Sent:* Saturday, October 03, 2026 6:37 PM
*To:* Kalpesh Patel <[email protected]>; 'Clint Chaplin'
<[email protected]>
*Cc:* 'Robert Heller' <[email protected]>; 'David T.'
<[email protected]>; [email protected]
*Subject:* Re: [GNC] Autosave question
It has NEVER prompted me to save.......I have that popup turned off
in the setting. I have the "autosave" option checked.
On 10/2/2026 8:41 PM, Kalpesh Patel wrote:
If it pops up and you don’t take any action to save then all those
transactions accumulated since last save will stay pending to be
saved; you’ll have to click on File àSave to persist them on to
the disk at your choosing. This would be also the case for when it
is shutting down because the shutdown process will kill the
process without saving. If you are automagically looking for the
system to press yes for that prompt when you asked for it to
prompt you then it is not going to do it for you. That dialogue is
for you to take the action; not for the system.
Understand the ramifications of not setting up to automatically
save and have it prompt to you for saving it very thoroughly.
While option is there to prompt for save, it makes little sense in
normal use case by a laymen to not automatically save all the time
at certain interval rather than prompt for it.
Knowing how GNC behaves, when you said “One of the options was to
save this time, one was to sautomagically save all the time
without asking, etc. I still have it pop up.” that is likely that
the setting you select during that pop up it is only good going
forward for that session of the GNC run and not saved persistently
to the disk. Once you exit and relaunch, it will re-read setting
from the disk and return back to prompting unless you go into Edit
àPreferences àGeneral and setup auto-save settings. If you uncheck
‘Show auto-save confirmation question’ in there, it will always
save at that interval without prompting (auto save does **not**
overwrite existing file; it creates a new file with a timestamp in
the name of the file). Right underneath is also setting to timeout
display of that “save now” pop-up so if you do not act within that
allotted prompt time and system ends up dismissing it due to time
out then it won’t save and all changes accumulated since last save
will be pending to be saved as well.
HTH.
*From:*Clint Chaplin <[email protected]> <mailto:[email protected]>
*Sent:* Friday, October 02, 2026 8:05 PM
*To:* Kalpesh Patel <[email protected]>
<mailto:[email protected]>
*Cc:* scum buster <[email protected]>
<mailto:[email protected]>; Robert Heller
<[email protected]> <mailto:[email protected]>; David T.
<[email protected]> <mailto:[email protected]>;
[email protected]
*Subject:* Re: [GNC] Autosave question
One other possibility; the default setup on my windows
installation was to pop up a window when autosave was triggered to
ask the user what to do. One of the options was to save this
time, one was to sautomagically save all the time without asking,
etc. I still have it pop up. If that option is enabled, what
happens when shut down?
On Fri, Oct 2, 2026 at 4:56 PM Kalpesh Patel
<[email protected]> wrote:
That sounds like your backend storage might be the cloud
storage or you
have very old drive that is not flushing cache before powering
down.
Assuming it is Intel pc, make sure BIOS settings for hard
drive is set to
AHCI mode and set it as removable or hot swappable drive type
which should
force it to flush cache upon power down command is sent to it.
-----
Excuse the typos. It's the mobile thingy!
On October 2, 2026 6:59:05 PM scum buster
<[email protected]> wrote:
>
> I have it set to autosave and apparantly it ISNT
autosaving.....its not
> just one transaction that gets lost...its a bunch, which
were done
> during my last session (if I did not manually save it).
>
> On 10/1/2026 5:56 PM, Kalpesh Patel wrote:
>> I have the pre-build binaries of the 4.14 version running
on Windows and it
>> auto saves as well. If anything it would only be the
current in-flight
>> transaction not saved.
>>
>> -----Original Message-----
>> From: Robert Heller <[email protected]>
>> Sent: Thursday, October 01, 2026 2:29 PM
>> To: David T. <[email protected]>
>> Cc: [email protected]; David Carlson
<[email protected]>; ?
>> scum buster <[email protected]>
>> Subject: Re: [GNC] Autosave question
>>
>> I'm still using a built-from-source 4.14, and the auto-save
does in fact
>> save the file.
>>
>> At Thu, 01 Oct 2026 21:42:17 +0530 "David T."
<[email protected]> wrote:
>>
>>> I don't use this feature, but the documentation very
clearly states:
>>>
>>> "Auto-save time interval: This field sets the number of
minutes between
>> each automatic saving of the file. Set to 0 to disable the
auto-save
>> feature."
>>> This (and the name of the preference) would strongly
suggest that the
>> feature is supposed to, ahem, *save* the file in question,
and not just toss
>> up a reminder.
>>> But, I'm sure I've misread things.
>>>
>>> David T.
>>>
>>> On October 1, 2026 8:50:27 PM GMT+05:30, David Carlson
>> <[email protected]> wrote:
>>>> iirc, auto save is only a reminder, not an action.
However, you
>>>> should be able to import transactions entered after the
last manual
>>>> save using the replay logs feature.
>>>>
>>>> On Thu, Oct 1, 2026 at 7:56C"B
>
> --
> This email has been checked for viruses by Avast antivirus
software.
> www.avast.com <http://www.avast.com>
_______________________________________________
gnucash-user mailing list
[email protected]
To update your subscription preferences or to unsubscribe:
https://lists.gnucash.org/mailman/listinfo/gnucash-user
-----
Please remember to CC this list on all your replies.
You can do this by using Reply-To-List or Reply-All.
--
Clint (JOATMON) Chaplin
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
Virus-free.www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
