Why risk it? Replace all moving parts and bearing surfaces? One I redid
actually required replacing the long collar for the needle bearings.
Everything has been in there the same amount of time and miles so unless you
want to go back into it in less than another 24K mi., do it all now and be
done with it.
RSRBOB
PS, there was side to side play in the swing arm at the front pivot shaft,
which must have been a problem on the 93 since there was a production line
change in the 94 frame that uses an adjuster to remove said play. To remove
the play, measure what it has, order two extra shims and have them surface
ground to take up the play, but allow 0.010".
