Re: Throttle body question

[nicholas.threader]

Hi George , although you have set the air screws , you need to do all the
things i recommended , at the same time , to reep the benefits of the
changes made.

The adaptors i used are brass with a 6mm thread one end and a spigot the
other end , it has flats in the middle and a hole through the center ( just
for your information ).
I also fitted the adaptors with small 'O' rings , to seal the adaptors
against the ports ( do not over tighten when fitting , hand tight will do ).

                                    atb Nick T


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.250 / Virus Database: 123 - Release Date: 18/04/2001