Thanks for the response Nick. One more question, do the vacuum hose go over
the outside of these ports...after of course the plugs are removed (in case
SAs get any ideas to pock at me). And if so what size are the vacuum hoses?
Mine seem to be a bit small for the outside diameter.
George
Looks like it will be a pain to place the hoses on the ports in such a tight
space, how did you do it Nick?
----- Original Message -----
From: "nicholas.threader" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, April 22, 2001 5:52 AM
Subject: Re: Throttle body question
> Hi George , you are correct , the plug is a cap screw which is undone with
a
> 5mm allen key , it has a 6mm thread and the thread is approx 10/12mm long
,
> it should also have a sealing washer under each cap screw.
> I can send you a picture if you want .
>
> atb Nick T
>
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.250 / Virus Database: 123 - Release Date: 18/04/2001
>
