Hi Ann, Was the document created on the bsp or was it inported?
-----Original Message----- From: Ann Edie [mailto:[email protected]] Sent: Sunday, July 04, 2010 10:07 PM To: [email protected] Subject: Re: [GWN] New Member with a Question about "Save as..." Hi, Don, I am using a BrailleSense Plus. I can follow your steps through typing the name without extension, but when I press "tab" (F3), I get a sound like clashing cymbals and the device ceases to respond. I reset and tried again, with the same results. Ann ----- Original Message ----- From: "don bishop" <[email protected]> To: <[email protected]> Sent: Sunday, July 04, 2010 9:00 PM Subject: Re: [GWN] New Member with a Question about "Save as..." > Ann, > > Just tried it here to be sure. > Bring up the save as dialog box with space s. Give it a couple seconds > for the current filename to appear. > Next if you want a new filename start typing. The old one will disappear > once you start typing. > Once you have typed the filename, no extension needed, press the tab key > (f3) and you should be in the file type box. The default file type will > be shown. Press space until the file type you want shows or is spoken. > > Finally press the tab key one more time and you should be on a confirm > button. Press enter there and your document will be saved in the format > you choose. > > If this doesn't work as described, try a reset of the braillesense and > then do it again. > > This should work with either the voice sense or braille sense. I can't > recall which you said you are using. > > Don > > > > On 7/4/2010 2:59 PM, Ann Edie wrote: >> Well, I get the same result when I just type the file name as "test" >> without any extension. Should I try typing it with "hbl"? >> >> Thanks for all the thoughts and suggestions. >> >> Ann >> >> ----- Original Message ----- From: "Joseph Lee" >> <[email protected]> >> To: <[email protected]> >> Sent: Sunday, July 04, 2010 4:57 PM >> Subject: RE: [GWN] New Member with a Question about "Save as..." >> >> >>> Hi, >>> I see what the person is doing: Just because we type a file extension >>> does >>> not mean the operating system will accept it. In order for the file >>> manager >>> to correctly interpret file contents, a correct file type must be >>> selected >>> before it can be named or vice versa. Just typing the words "test.brf" >>> will >>> not help the operating system - in a sense, it would be named >>> "test.brf.hbl" >>> since HBL (Hansone-braille document) is the default file format. >>> Remember >>> how old viruses worked to get our attention: fooling around with an >>> extension will not work. >>> Just a thought. >>> Cheers, >>> Joseph P.S. Welcome to the list... >>> >>> -----Original Message----- >>> From: Joe Giovanelli [mailto:[email protected]] >>> Sent: Sunday, July 04, 2010 11:54 AM >>> To: [email protected] >>> Subject: Re: [GWN] New Member with a Question about "Save as..." >>> >>> Ann, >>> >>> Much of the way the BSP works is like Windows. The "save as" command is >>> certainly like that. >>> >>> After completing a file, it must be named in order to save it. This is >>> where the "save as" command comes in. I guess you already know how to >>> bring >>> that command up so I'll skip that. >>> >>> >>> When you have the command on your display, give it a name, including its >>> extension. If you wish the file to be stored in the default folder (My >>> Documents), just press "enter. The file will be saved. Note that you do >>> not use "tab." >>> >>> If you wish to use another folder other than the default, press the >>> "shift-tab" that's space plus dots 2-3. This puts you in a list of >>> folders >>> which you can move you with the space plus dot 4 or dot 2. When you have >>> selected the desired folder, press "enter." >>> >>> Now tab a couple of times. The first tab shows your filename plus >>> extension. >>> The next tab shows the file type. The next tab says "confirm." Press >>> "enter" here and the file will be saved. >>> >>> Joe G. >>> >>> ----- Original Message ----- >>> From: "Ann Edie" <[email protected]> >>> To: unknown <[email protected]> >>> Date: Sunday, Jul 4, 2010 0:11:20 >>> Subject: [GWN] New Member with a Question about "Save z..." >>> >>>> >>>> >>>> >>>> >>>> Hi, All, >>>> >>>> I have just taken possession of a BrailleSense Plus which was >>>> purchased by >>> a school district for the use of a student whom I will be seeing over >>> the >>> summer. I need to figure out the basic functions of the device so that I >>> can teach the student how to use it in preparation for the next school >>> year >>> when he will be in the 6th grade. I am a BrailleNote user myself, but >>> this >>> is my first experience with the BrailleSense. >>>> >>>> So far I do like the device, but I am having difficulty with the "save >>> z..." feature. I can find the item and get the prompt which asks me to >>> name >>> the file. When I type in the name I want the file to be called, I can >>> see >>> those characters on the braille display. If I were using my desktop >>> computer with microsoft Word, after typing the file name, I would tab >>> to the >>> next prompt which would ask me for the file format. But what do I do at >>> this point on the BrailleSense? >>>> >>>> I have tried pressing Space-dots 4, 5, which I think is the >>>> equivalent of >>> "tab", and I have tried pressing "Enter", but in both cases, the device >>> seems to freeze, and doesn't respond to any commands, such as >>> "Space-Z" or >>> "Space-every." So I have resorted to the reset button, which of course >>> causes the data in the file to be lost. >>>> >>>> Can anyone help me with the details of how to work through the "save >>>> z..." >>> routine, or point me to the spot in the manual where this is explained >>> in >>> detail? >>>> >>>> Thank you very much. >>>> >>>> Best, >>>> Ann in NY >>>> >>>> >>>> If you wish to unsubscribe from this list, visit: >>>> >>>> http://www.gwmicro.com/listserv >>> >>> If you wish to unsubscribe from this list, visit: >>> >>> http://www.gwmicro.com/listserv >>> >>> No virus found in this incoming message. >>> Checked by AVG - www.avg.com >>> Version: 8.5.439 / Virus Database: 271.1.1/2981 - Release Date: 07/04/10 >>> 06:35:00 >>> >>> If you wish to unsubscribe from this list, visit: >>> >>> http://www.gwmicro.com/listserv >>> >>> >> >> If you wish to unsubscribe from this list, visit: >> >> http://www.gwmicro.com/listserv >> >> >> __________ NOD32 5251 (20100704) Information __________ >> >> This message was checked by NOD32 antivirus system. >> http://www.eset.com >> >> >> > > If you wish to unsubscribe from this list, visit: > > http://www.gwmicro.com/listserv > > If you wish to unsubscribe from this list, visit: http://www.gwmicro.com/listserv If you wish to unsubscribe from this list, visit: http://www.gwmicro.com/listserv
