> -----Original Message-----
> From: IBM Mainframe Discussion List On Behalf Of Jerry Ragland
>
> Hi all,
>
> We have our new CICS TS 3.1 installed in our z/OS 1.4 system
> and I have included the **.SDFHLPA member in to the LPALSTxx
> member of the SYS1.PARMLIB to load the new modules in to the LPA area.
>
> I IPLed the machine and I found the new members are not
> loaded in to the LPA and the new CICS is throwing errors
> because of that. Then I found CLPA should be specified to
> make a fresh load happen in the LPA area. In the internet I
> found that r 0,CLPA should be given for this message "IEA101A
> SPECIFY SYSTEM PARAMETERS" during the IPL, but I didnt get
> this message during the IPL.
>
> Please let me know is there any other ways I can enable CLPA.
> Also in the IEASYSAW member I can see CLPA mentioned -
>
> CLOCK=00, SELECT CLOCK00
> CLPA,
> CMB=(UNITR,COMM,GRAPH,CHRDR), ADDITIONAL CMB ENTRIES
>
> Is there anything I can do to check whether the last IPL was
> CLPA enabled and if its not enabled how to enable it.
If you are certain that IEASYSAW is being used for the IPL, then
something is definitely wrong and you should contact IBM Support for
assistance. According to your snippet, your system should create a
fresh LPA every time you IPL with IEASYSAW.
-jc-
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
