+1 on Tony's remark - but I do find the discussions and experiences of the people here always fascinating and entertaining :-).
As it was mentioned, the 3270 / console setting - I had to use the "operator console" to get my z/VM 6.3 instance to play along. If I used the 3270 option for the SYSC the system would shut down and enter "Not operating" state as soon as I disconnected from the ICC. I know the "operator console" is listed as only supported for z/OS, but reading between the lines it definitely seems like in order to use a SYSC for z/VM you need something like DTD -- but that might be a topic for a 2020-edition of an old thread (which I sadly can't seem to find again). On Tue, Jul 21, 2020 at 4:30 PM Dana Mitchell <[email protected]> wrote: > We recently migrated to z14's and I was working on setting up the ICC > definitions on the new boxes. One of the docs I ran across pointed out the > fact that there is only one gateway address, and had a nice diagram > showing one of the ports connected to the outside world, and the other > port relegated to connecting to a local non-routable LAN. Not sure which > pdf it was in. > Dana > > On Tue, 21 Jul 2020 09:23:59 -0400, Tony Thigpen <[email protected]> wrote: > >It had to do with the limited IP configuration when using both ports. He > had it > >working with one port, but he thought he was misunderstanding the > >limitations on the second port because, IMHO, they are confusing. He had > >it right even though it looked wrong. > > > >Tony Thigpen > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
