I don't ever use SYSC. Hum, I thought that was the 3270 emulation in the
HMC that did not use an ICC connection. (I never use the HMC 3270
emulation either.)
Maybe I am not understanding the SYSC stuff.
Tony Thigpen
Christian Svensson wrote on 7/21/20 11:24 AM:
+1 on Tony's remark - but I do find the discussions and experiences of the
people here always fascinating and entertaining :-).
As it was mentioned, the 3270 / console setting - I had to use the
"operator console" to get my z/VM 6.3 instance to play along. If I used the
3270 option for the SYSC the system would shut down and enter "Not
operating" state as soon as I disconnected from the ICC. I know the
"operator console" is listed as only supported for z/OS, but reading
between the lines it definitely seems like in order to use a SYSC for z/VM
you need something like DTD -- but that might be a topic for a 2020-edition
of an old thread (which I sadly can't seem to find again).
On Tue, Jul 21, 2020 at 4:30 PM Dana Mitchell <[email protected]> wrote:
We recently migrated to z14's and I was working on setting up the ICC
definitions on the new boxes. One of the docs I ran across pointed out the
fact that there is only one gateway address, and had a nice diagram
showing one of the ports connected to the outside world, and the other
port relegated to connecting to a local non-routable LAN. Not sure which
pdf it was in.
Dana
On Tue, 21 Jul 2020 09:23:59 -0400, Tony Thigpen <[email protected]> wrote:
It had to do with the limited IP configuration when using both ports. He
had it
working with one port, but he thought he was misunderstanding the
limitations on the second port because, IMHO, they are confusing. He had
it right even though it looked wrong.
Tony Thigpen
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
