I think that was a MOD5 unit. As I recall, I had one of those when I worked on OBS/Wylbur.

On 7/29/2026 7:36 PM, Seymour J Metz wrote:
3279-5?


--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
עַם יִשְׂרָאֵל חַי
נֵ֣צַח יִשְׂרָאֵ֔ל לֹ֥א יְשַׁקֵּ֖ר




________________________________________
From: IBM Mainframe Discussion List <[email protected]> on behalf of Phil 
Smith III <[email protected]>
Sent: Wednesday, July 29, 2026 6:09 PM
To: [email protected] <[email protected]>
Subject: Re: [EXTERNAL] Re: IBM Statement of Direction


External Message: Use Caution


I had two 3278-4s for a while, then swapped one for a 3279-5 when I worked on a 
product that did color. Those were GREAT machines, with great keyboards.

Being in the D.C. area, I used to say that if they said the missiles were 
headed our way, I'd just get under my desk--I might get crushed, but I was 
pretty sure the 327x would survive just about anything!

-----Original Message-----
From: IBM Mainframe Discussion List <[email protected]> On Behalf Of 
Pommier, Rex
Sent: Wednesday, July 29, 2026 5:57 PM
To: [email protected]
Subject: Re: [EXTERNAL] Re: IBM Statement of Direction

Hey, Radoslaw, I resemble your remarks!  I had a 3290 on my desk decades ago.  
Man that thing was noisy!

Rex

-----Original Message-----
From: IBM Mainframe Discussion List <[email protected]> On Behalf Of 
Radoslaw Skorupka
Sent: Wednesday, July 29, 2026 3:45 PM
To: [email protected]
Subject: Re: [EXTERNAL] Re: IBM Statement of Direction

They drop veeeery old equipment, which actually cannot be attached to any CPC 
which could run current OS.
Even 3380 as an emulation is no longer available in contemporary DASD systems.
OSAD - you can define it, but it is useless. So you will not loose anything by 
dropping it.
3290 - the only person who remember this dev is Shmuel (that's a joke).
3330 - really? It's older than me!
9032 - ESCON director. Current OS support z15 and next generations.
ESCON was available until z196.
etc.

What about shops using old equipment? They also use old OS.
I strongly doubt some shop like UBS or BofA is using new shining z17's connected to 
Bus & Tag or ESCON attached peripherals.

My $0.02

--
Radoslaw Skorupka
Lodz, Poland




W dniu 29.07.2026 o 21:50, Tom Brennan pisze:
I was thinking it's the UNIT= parameter in an IOCP, but I could be
wrong.  Is that considered a device class?  I never learned HCD.

For old-to-new DS8000 hardware migrations, I'll often get a CSV config
file from the old DS8000, run it through a script, and come up with
CLI commands that will make the new box look like the old one.  I saw
some 3380's on a client's box while doing this maybe 5 years ago.
Probably gone by now.

On 7/29/2026 9:20 AM, Phil Smith III wrote:
If only there was some sort of definitive way to tell, like IBM
specifying the device types and models for which they're dropping
support... /s

Srsly, device type and model is the canonical way IBM describes
things; I'm gobsmacked that this SoD doesn't list them. Actually it's
even worse: it DOES say "Device Types" but then lists device
*classes* (like "CTC").

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN




----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

--
Regards,
Steve Thompson

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

Reply via email to