On Wed, 5 Apr 2017 16:21:39 +0000, Neubert, Kevin <[email protected]> wrote:
>Seems like the desired IODF is not in effect. > >D SMS,LIB(DLMLIB),DETAIL should show the library ID in effect. > >D IOS,CONFIG will show the IODF in effect. If you are able, run this job >against your IODF. Output should confirm how your drives are currently >defined. > >// EXEC PROC=CBDJRPTS, >// RPARM='REPORT, M ,,,,,', >// IODF='YOUR.IODF.HERE' > >Regards, > >Kevin <snip> > 00000290 D SMS,LIB(DLMLIB),DETAIL > > 00000290 F OAM,D,LIB,DLMLIB,L=DSPROC-Z > >427 00000090 CBR1110I OAM library status: 532 > >532 00000090 TAPE LIB DEVICE TOT ONL AVL TOTAL EMPTY SCRTCH >ON OP >532 00000090 LIBRARY TYP TYPE DRV DRV DRV SLOTS SLOTS VOLS > >532 00000090 DLMLIB UNK 0 0 0 0 0 0 >Y N >532 00000090 >---------------------------------------------------------------------- >532 00000090 LIBRARY ID: 00001 > > It does show it as 00001 - the same as the gen. > >Mark Zelden asked " Are you sure the library id and libport match what >Dell/EMC set up?" >I can't verify that myself but will ask them to double check. Library id >"00001" is specified in both the I/O gen and SMS. Thanks to Lizette for pointing out that the SMS config could have been wrong also. I guess I just assume "hardware issue" first since us sysprogs always know what we are doing and never make mistakes. :-) Check with Dell/EMC. Also, for all the implementations I have been involved with, Dell/EMC typically provides an "Architecture level 2" and "Architecture level 3" document and they have had the library ids and port IDs identified for all the libraries being implemented within the DLm(s). If you have a document like that check it and see if they documented something else. Regards, Mark -- Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS ITIL v3 Foundation Certified mailto:[email protected] Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html Systems Programming expert at http://search390.techtarget.com/ateExperts/ ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
