The template is the one you sent. But I will troubleshoot it.
But looking at Eudora, it identifies a POP3 login, but not one for SMTP/RELAY.
Does SMTP Authentication use the POP3 login?
best, paul
At 07:42 AM 8/19/02 -0400, you wrote:
>You need to follow the instructions that I gave you previously to
>troubleshoot your template. The only thing that can
>cause the server to reject a login is your template.
>
>Regards,
>
>Howie
>
>----- Original Message -----
>From: <[EMAIL PROTECTED] (paul smith)>
>To: "inFusion Support List" <[EMAIL PROTECTED]>
>Sent: Monday, August 19, 2002 2:05 AM
>Subject: [iMS]
>
>
> > I've enabled SMTP Authentication (but I have not enabled APOP
> Authentication).
> >
> > To test it out I used Eudora at a client remote from the iMS server. I set
> > the iMS server as the POP3 & SMTP servers. I used the POPs login to relay
> > the message fine through the iMS server. The following is the log entry.
> >
> > The RELAY server is set to listen to IP addresses from the remote server
> > where my Eudora client is located. So this explains why the message
> was sent.
> >
> > But why was SMTP LOGIN Auth rejected?
> >
> > best, paul
> >
> >
> > 08/18/2002 10:46:52 PM [014] SEG [65.172.212.146] Connected (1 total)
> > 08/18/2002 10:46:52 PM [014] SMTP LOGIN Authentication rejected.
> > 08/18/2002 10:46:53 PM [014] RELAY SEG [65.172.212.146]
> > <[EMAIL PROTECTED]> [EMAIL PROTECTED] 832
> > 08/18/2002 10:46:53 PM [014] SEG [65.172.212.146] Disconnected (1 total)
> >
==^=======================================================
This list server is Powered by iMS
"The Swiss Army Knife of Mail Servers"
--------------------------------------
To leave this list please complete the form at
http://www.coolfusion.com/iMSSupport.cfm
Need an iMS Developer license? Sign up for a free license here:
http://www.coolfusion.com/iMSDevelopers.cfm
List archives: http://www.mail-archive.com/infusion-email%40eoscape.com/
Note: You are subscribed as [email protected]
==^=======================================================
