I haven't found anywhere that had that yet, but out of curiosity what file is it that had that in it? I have checked all my init scripts etc and nothing like that exists.
I did find this however, and it notes that there has been a problem with this before... I will try loading the msp3400 driver and test that, but I just find it odd that it used to work, but now doesn't. Here's the link to the FAQ item I found: http://ivtv.sourceforge.net/FAQ.html#_jump14 And after looking at that log output I posted in my last mail, I guess I am running a saa7115, unless you think there's a way that it's mistakenly finding the wrong chipset somehow? Mito -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Arendt Sent: Tuesday, July 04, 2006 12:50 AM To: User discussion about IVTV Subject: Re: [ivtv-users] No sound after updating to ivtv 7 and kernel 2.4.17 hi, yesterday I also had a problem with sound when upgrading to ivtv 7. In my startup scripts, I had a line modprobe msp3400 standard=0x03 Removing standard=0x03 fixed to sound problem. bye, David Arendt Mito wrote: > Hans, > > Sorry to take up your time, but I wanted to be sure you saw this. > > My card is a PVR-150 actually, and I would love to tell you what chipset I > have to help you out via troubleshooting / testing, but I am not sure how to > find out the chipset without taking off the heatsink, which I don't want to > do if I don't have to. > > What can I do to help you out in this case, and possibly figure out a way to > solve my problem at the same time? > > Oh, and here's the output of that log-status that you asked for: > > [EMAIL PROTECTED] mythtv]# ivtvctl --log-status > ioctl VIDIOC_LOG_STATUS ok > ivtv0: ================= START STATUS CARD #0 ================= > tveeprom 0-0050: Hauppauge model 48231, rev D133, serial# 727051 > tveeprom 0-0050: tuner model is Temic 4039FR5 (idx 33, type 21) > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 0-0050: audio processor is MSP3435 (idx 10) > tveeprom 0-0050: has radio > tuner 0-0061: Tuner mode: analog TV > tuner 0-0061: Frequency: 127.25 MHz > tuner 0-0061: Standard: 0x00003000 > saa7115 0-0021: Audio frequency: 48000 Hz > saa7115 0-0021: Video signal: ok > saa7115 0-0021: Frequency: 60 Hz > saa7127 0-0044: Standard: 60 Hz > saa7127 0-0044: Input: normal > saa7127 0-0044: Output: S-Video + Composite > saa7127 0-0044: WSS: disabled > saa7127 0-0044: VPS: disabled > saa7127 0-0044: CC: disabled > msp3400 0-0040: MSP3435G-B6 rev1 = 0x0207 rev2 = 0x2346 > msp3400 0-0040: Audio: volume 58950 > msp3400 0-0040: Audio: balance 32768 bass 32768 treble 32768 loudness > off > msp3400 0-0040: Standard: could not detect sound standard (mono) > msp3400 0-0040: Audmode: 0x0001 > msp3400 0-0040: Routing: 0x00000000 (input) 0x00000044 (output) > msp3400 0-0040: ACB: 0x0c00 > ivtv0: ================== END STATUS CARD #0 ================== > > > Mito > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Hans Verkuil > Sent: Saturday, July 01, 2006 5:00 PM > To: User discussion about IVTV > Subject: Re: [ivtv-users] No sound after updating to ivtv 7 and kernel > 2.4.17 > > On Saturday 01 July 2006 22:46, Mito wrote: > >> Hello to all! >> >> First of all, thanks to everyone who will help, as I know how much >> work it is sometimes to help people. >> >> My problem first started a few days ago when I was trying to re-setup >> my frontend to my MythTV system. In doing so, I decided to do an >> update to my backend server (which in hindsight, I probably shouldn't >> have done.). It updated my kernel to version 2.6.17-1.2139_FC4. >> Well, as I always do when possible, I rebooted my server after doing >> the update just to make sure things behaved properly, and to let the >> new kernel be used. I left it at this time, but then a day and a >> half later I noticed that none of my recordings have been taking >> place. I do a little troubleshooting and do another yum update, and >> this time find a new ivtv and ivtv-modules (I used the atrpms to >> install ivtv originally) so I figure that there is a new version of >> ivtv for my new kernel, cool, this will fix my problem. Well, it >> did, kinda. Now I am recording video, which is always nice, but no >> audio. Just to be sure that it wasn't a MythTV problem, I ran this >> command: >> >> cat /dev/video0 > test.mpg >> >> Then I played that file, and sure enough, there's video but no sound. >> Also to make sure that I wasn't having problems with my sound, I >> played a recording from before the update, and the sound works >> perfectly. >> >> Then in troubleshooting, I backed up my firmware files and then >> replaced them via the instructions here: >> http://ivtvdriver.org/index.php/Firmware#Obtaining_and_Installing_the >> _Firmwa re >> >> That still didn't work. so now I'm emailing for help, as I need it >> :-) >> >> Here is my dmesg. Thanks in advance for any help you're able to >> give! >> > > Please provide the output of ivtvctl --log-status while recording a > program. It should give me some info on the sound. > > By the way: can you verify that your card has a saa7114 chip instead of > a saa7115? I noticed this in your log. It's probably quite an old > PVR350, right? If you do have a saa7114, then I'd like to ask you some > tests. Note that this is unrelated to your sound problem, it's just an > issue with the saa7114 that I'd like to clear up. > > Thanks, > > Hans > > >> ivtv: no version for "struct_module" found: kernel tainted. >> ivtv: ==================== START INIT IVTV ==================== >> ivtv: version 0.7.0 (development snapshot compiled on Thu Jun 29 >> 13:55:05 2006) loading >> ivtv: Linux version: 2.6.17-1.2139_FC4 mod_unload 686 REGPARM >> 4KSTACKS gcc-4.0 >> ivtv: In case of problems please include the debug info between >> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >> ivtv: any module options, when mailing the ivtv-users mailinglist. >> ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) >> ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 169 >> ivtv0: Unreasonably low latency timer, setting to 64 (was 32) >> tveeprom 0-0050: Hauppauge model 48231, rev D133, serial# 727051 >> tveeprom 0-0050: tuner model is Temic 4039FR5 (idx 33, type 21) >> tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) >> tveeprom 0-0050: audio processor is MSP3435 (idx 10) >> tveeprom 0-0050: has radio >> tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) >> saa7115 0-0021: saa7114 found @ 0x42 (ivtv i2c driver #0) >> saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) >> msp3400 0-0040: MSP3435G-B6 found @ 0x80 (ivtv i2c driver #0) >> msp3400 0-0040: MSP3435G-B6 supports radio, mode is autodetect and >> autoselect >> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >> ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) >> ivtv0: Encoder revision: 0x02050032 >> ivtv0: Decoder revision: 0x02020023 >> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB >> total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers >> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 >> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: >> 455 x 4608 buffers (2048KB total) >> ivtv0: Create encoder radio stream >> ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB >> total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers >> (1024KB total) ivtv0: Create decoder VOUT stream >> ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB >> total) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) >> tuner 0-0061: type set to 21 (Temic NTSC (4039 FR5)) >> ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 >> ivtv: ==================== END INIT IVTV ==================== >> > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
