Hi, i think the delay routine is for charging/powering the circuit from one-wire bus, which only contains one data+vdd and one ground pin. If you power the sensor IC with a seperate Vdd line, the delay time could be less, and not as much critical, but i can not tell if this is the case, because the schematics link on this thread didn't work for me...
If this can be without the power line and with no or less delay, this would be very nice. Greetings, Serdar 2011/1/15 Joep Suijs <[email protected]> > 2011/1/15 vasile surducan <[email protected]>: > > > > > > On Sat, Jan 15, 2011 at 1:21 AM, vasile surducan <[email protected]> > > wrote: > >> even when display on a 7 segment? and display is multiplexed... > >> Vasile > > I don't see why not. If the display routine requires strict timing > like with multiplexing, the design of your program should be > accordingly. I'm not sure if the seven segment display accepts ascii > (an requirement for format.jal), but you can make this if you need it. > Of course, you can add additional constaints so it won't work with > generic libraries. You have to do specific optimisations in JAL or > revert to assembler. > > Joep > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<jallib%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/jallib?hl=en. > > -- *Serdar KIZILTOPRAK Intelligence **Technology Systems [email protected] http://www.its3k.com +90(216) 518 15 00* ** <#> <#> <#> <#> -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
