Hi Mickey, Thanks. Have made some progress - it now works so long as I don't restart the SBC...
MickeyG;267468 Wrote: > > 2. Change channel of your wireless network. This seems to have been one of the problems. I changed from channel 9 to channel 4 - my neighbours network is at channel 11 (and seems to vary between 30%-90% strength); I think that's close enough to cause interference? After doing this, the (new) SBC connected immediately, found the SBR and updated its software. It then worked sweetly for all of two minutes before it all went wrong again :( (This is real progress, remember I hadn't previously been able to get the new SBC to connect to the wireless network at all) After many reboots, and wireless reconfigurations, I think I finally have recreatable behaviour. When I put the SBR into configuration mode and get the SBC to configure it, that process goes smoothly and I can subsequently use the SBC. It's nice and responsive, and works all over the house. However, if I then shut down the SBC and restart it, it will usually spin for ever while trying to "connect to Squeezebox". If it does connect, it then becomes unstable, apparently failing to talk to the server so hanging at various points of the menu, not getting coverart or status updates etc. When it's not working (or unstable) then pinging the SBC drops 80-100% packets. When it's working, pinging the SBC works perfectly. I think I'm getting the same behaviour with the older SBC; so this now feels like a software problem. Both remotes are now on r1879; server is build 17379. Thanks, Ian -- iwp http://www.last.fm/user/iwp/ ------------------------------------------------------------------------ iwp's Profile: http://forums.slimdevices.com/member.php?userid=409 View this thread: http://forums.slimdevices.com/showthread.php?t=43243 _______________________________________________ jive mailing list [email protected] http://lists.slimdevices.com/cgi-bin/mailman/listinfo/jive
