On 3/24/2020 11:26 AM, Dr. Feng Hsu wrote:
(the two rectangular alumi pieces showing the attached picture).
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Here is an "out of the box" suggestion.
If the cable is like the cable in the photo, bare wire wound sheath,
https://www.aircraftspruce.com/catalog/appages/buttondashctrl.php?clickkey=6815944#productMainImage
a similar cable is used on my pull starter. It uses a course thread nut
on each side of a fixture to hold / adjust the sheath in position. The
nuts simply spin on to the sheath. If these nuts hold firmly enough for
your need, run the cable through the rectangular blocks with a nut on
each side of the block to adjust / hold the sheath in place. A lock
washer to hold adjustment? Maybe........?
Larry Flesner
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/[email protected]/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to [email protected]
