Hi, Woukd cycle/motorcycle 'brake' or 'clutch cable adjusters' not work which are freely available, usually M6 thread for brake cables or M8 thread for clutch cables?
Alternatively I received extra long cable adjusters as part of a MacFarlane Rotax twin carb throttle control kit so they should be able to help but essentially they're bicycle components so eBay has them very cheap. Brad ________________________________ From: KRnet <[email protected]> on behalf of Flesner via KRnet <[email protected]> Sent: 24 March 2020 16:10:46 To: [email protected] Cc: Flesner; KRnet Subject: KR> barrel adjusters On 3/24/2020 10:44 AM, Dr. Feng Hsu wrote: > Yes Larry, it took me a day on researching and talking to local motor > cycle shops to found out the name for it (barrel adjusters)! > Dr. Hsu +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ As this is "experimental", I wonder if: you can go with a totally different connector?, or instead of using a bolt, drilling a hole down the center, and then cutting a slot, 1. start with a length of threaded rod, correct diameter and thread size 2. spin a nut on each end just beyond the length required 3. use the nuts to hold the threaded rod in a vise 4. use a small dremel type tool to cut a slot in the rod to accept the cable eliminating the need to center drill Just wondering.............. Larry Flesner _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected] _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
