On Tuesday, 13.03.2018 at 17:52, Andre Przywara wrote:
> For now I would take the one from the kernel, if you care about
> Ethernet. However I will soon resend a DT update series which would
> allow you to use $fdtcontroladdr.

I've now done a full cross debootstrap on the host to work around the
kernel BUG, adding the kernel modules from 4.16-rc5 manually to the rootfs.
Interestingly, U-boot or the kernel don't seem to see the ethernet device
at all. Also, the ATF is complaining about setting up the PMIC which may be

    U-Boot SPL 2018.03 (Mar 13 2018 - 16:40:00 +0100)
    DRAM: 1024 MiB
    Trying to boot from MMC1
    NOTICE:  BL3-1: Running on A64/H64 (1689) in SRAM A2 (@0x44000)
    NOTICE:  Configuring SPC Controller
    NOTICE:  BL3-1: v1.0(debug):ae787242
    NOTICE:  BL3-1: Built : 17:30:05, Mar 12 2018
    NOTICE:  DT: sun50i-a64-olinuxino
    NOTICE:  Configuring AXP PMIC
    NOTICE:  PMIC: Output power control 2 is an unexpected 0x40
    ERROR:   PMIC: setup failed: -3
    NOTICE:  SCPI: dummy stub handler, implementation level: 000000
    INFO:    BL3-1: Initializing runtime services
    INFO:    BL3-1: Preparing for EL3 exit to normal world
    INFO:    BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9


    U-Boot 2018.03 (Mar 13 2018 - 16:40:00 +0100) Allwinner Technology

    CPU:   Allwinner A64 (SUN50I)
    Model: Olimex A64-Olinuxino
    DRAM:  1 GiB
    Loading Environment from FAT... Unable to use mmc 1:0... Failed (-5)
    Loading Environment from MMC... *** Warning - bad CRC, using default

    Failed (-5)
    Warning: HDMI PHY init timeout!
    Warning: HDMI PHY init timeout!
    In:    serial
    Out:   serial
    Err:   serial
    Net:   No ethernet found.
    starting USB...
    No controllers found
    Hit any key to stop autoboot:  0

If I try to manually "modprobe dwmac-sun8i" once booted then the module
loads but nothing appears in the kernel log and I get no network interface,
so presumably it can't see the device.

This is with the DTB from 4.16-rc5.


You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to