Hi, On Thursday, 15.03.2018 at 13:52, Andre Przywara wrote: > > Still running at 648 Mhz and haven't seen the BUG again, but am only > > moderately loading the board with building and running self-tests for the > > project I'm working on [1] out of tmpfs.
Running for an hour or so now and "BUG: bad page state in process ..." has reappeared so I suspect we're not out of the woods yet. > Do you have access to an original BSP image from Olimex? My > understanding was the "boot0" blob used in there is tailored to each > board, as it contains the proper delay values for each DRAM line as laid > out on the PCB. We took the values from the Pine64 boot0 for the SPL. > I don't really know if those blobs are *really* board specific or if > people just copy from each other, but at least it's worth a try. > > So if you send me (or point me to) the blob, I can bake a patch which > uses those delay values and you could give it a test. > I just need the part from 8KB to 40KB of an SD card image. It should > have some eGON signature in the first line of a hexdump. > It should look something like this: > https://github.com/longsleep/build-pine64-image/blob/master/blobs/boot0.bin Here you go: https://gist.github.com/mato/c0f64eeb139cad6a98c7cdc7c86c70d0 Cheers, -mato -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
