Dear all
I own new device: an "Argosy HD530 Harddisk-enclosure" with a Note-book ide disk
inside. The device works under Windows98 on the same machine, so physics should work.
When I connect the drive I can see activities in /var/log/messages,
sending an INQUIRY message to the disk.
This seems to fail and afterwards the processes modprobe and scsi_eh_1 seem to hang:
2707 pts/2 S 0:00 tail -f /var/log/messages
2708 ? S 0:00 /bin/bash /etc/hotplug/usb.agent
2712 ? S 0:00 /bin/bash /sbin/hotplug usb
2714 ? S 0:00 logger -t /sbin/hotplug[2708]
2718 ? S 0:00 /bin/bash /etc/hotplug/usb.agent
2720 ? S 0:00 logger -t /etc/hotplug/usb.agent[2708]
2736 ? D 0:00 /sbin/modprobe -vs usb-storage
2737 ? SW 0:00 [usb-storage-0]
2738 ? DW 0:00 [scsi_eh_1]
Consequently the device does not show in /proc/scsi/scsi
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: Model: Rev:
Type: <NULL> ANSI SCSI revision: ffffffff
Any idea what I can try to track down the problem?
Regades
Christian
Here comes /var/log/messages with debug on in usb-storage:
Oct 23 22:41:44 Mahrmaid kernel: hub.c: port 1, portstatus 100, change 0, 12 Mb/s
Oct 23 22:41:44 Mahrmaid kernel: ehci-hub.c: GetStatus port 2 status 0x1803 POWER
speed=2 CSC CONNECT
Oct 23 22:41:44 Mahrmaid kernel: hub.c: port 2, portstatus 501, change 1, 480 Mb/s
Oct 23 22:41:44 Mahrmaid kernel: hub.c: port 2 connection change
Oct 23 22:41:44 Mahrmaid kernel: hub.c: port 2, portstatus 501, change 1, 480 Mb/s
Oct 23 22:41:44 Mahrmaid kernel: hub.c: port 2, portstatus 501, change 0, 480 Mb/s
Oct 23 22:41:45 Mahrmaid last message repeated 3 times
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 2, portstatus 511, change 0, 480 Mb/s
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 2 of hub 1 not reset yet, waiting 10ms
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 2, portstatus 511, change 0, 480 Mb/s
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 2 of hub 1 not reset yet, waiting 10ms
Oct 23 22:41:45 Mahrmaid kernel: ehci-hub.c: 00:12.2 port 2 full speed, give to
companion, 0x1801
Oct 23 22:41:45 Mahrmaid kernel: ehci-hub.c: GetStatus port 2 status 0x3801 OWNER
POWER speed=2 CONNECT
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 2, portstatus 0, change 10, 12 Mb/s
Oct 23 22:41:45 Mahrmaid kernel: ehci-hcd.c: 00:12.2: free_config devnum 0
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 3, portstatus 100, change 0, 12 Mb/s
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 4, portstatus 100, change 0, 12 Mb/s
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 5, portstatus 100, change 0, 12 Mb/s
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 1 connection change
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 1, portstatus 101, change 0, 12 Mb/s
Oct 23 22:41:45 Mahrmaid last message repeated 3 times
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 1, portstatus 103, change 10, 12 Mb/s
Oct 23 22:41:45 Mahrmaid kernel: hub.c: new USB device 00:12.1-1, assigned address 2
Oct 23 22:41:45 Mahrmaid kernel: usb.c: kmalloc IF c9c82900, numif 1
Oct 23 22:41:45 Mahrmaid kernel: usb.c: new device strings: Mfr=1, Product=1,
SerialNumber=0
Oct 23 22:41:45 Mahrmaid kernel: usb.c: USB device number 2 default language ID 0x409
Oct 23 22:41:45 Mahrmaid kernel: Manufacturer: USB to IDE
Oct 23 22:41:45 Mahrmaid kernel: Product: USB to IDE
Oct 23 22:41:45 Mahrmaid kernel: usb.c: unhandled interfaces on device
Oct 23 22:41:45 Mahrmaid kernel: usb.c: USB device 2 (vend/prod 0x4ce/0x2) is not
claimed by any active driver.
Oct 23 22:41:45 Mahrmaid kernel: Length = 18
Oct 23 22:41:45 Mahrmaid kernel: DescriptorType = 01
Oct 23 22:41:45 Mahrmaid kernel: USB version = 1.10
Oct 23 22:41:45 Mahrmaid kernel: Vendor:Product = 04ce:0002
Oct 23 22:41:45 Mahrmaid kernel: MaxPacketSize0 = 8
Oct 23 22:41:45 Mahrmaid kernel: NumConfigurations = 1
Oct 23 22:41:45 Mahrmaid kernel: Device version = 2.60
Oct 23 22:41:45 Mahrmaid kernel: Device Class:SubClass:Protocol = 00:00:00
Oct 23 22:41:45 Mahrmaid kernel: Per-interface classes
Oct 23 22:41:45 Mahrmaid kernel: Configuration:
Oct 23 22:41:45 Mahrmaid kernel: bLength = 9
Oct 23 22:41:45 Mahrmaid kernel: bDescriptorType = 02
Oct 23 22:41:45 Mahrmaid kernel: wTotalLength = 0020
Oct 23 22:41:45 Mahrmaid kernel: bNumInterfaces = 01
Oct 23 22:41:45 Mahrmaid kernel: bConfigurationValue = 01
Oct 23 22:41:45 Mahrmaid kernel: iConfiguration = 00
Oct 23 22:41:45 Mahrmaid kernel: bmAttributes = 40
Oct 23 22:41:45 Mahrmaid kernel: MaxPower = 0mA
Oct 23 22:41:45 Mahrmaid kernel:
Oct 23 22:41:45 Mahrmaid kernel: Interface: 0
Oct 23 22:41:45 Mahrmaid kernel: Alternate Setting: 0
Oct 23 22:41:45 Mahrmaid kernel: bLength = 9
Oct 23 22:41:45 Mahrmaid kernel: bDescriptorType = 04
Oct 23 22:41:45 Mahrmaid kernel: bInterfaceNumber = 00
Oct 23 22:41:45 Mahrmaid kernel: bAlternateSetting = 00
Oct 23 22:41:45 Mahrmaid kernel: bNumEndpoints = 02
Oct 23 22:41:45 Mahrmaid kernel: bInterface Class:SubClass:Protocol = 08:06:50
Oct 23 22:41:45 Mahrmaid kernel: iInterface = 00
Oct 23 22:41:45 Mahrmaid kernel: Endpoint:
Oct 23 22:41:45 Mahrmaid kernel: bLength = 7
Oct 23 22:41:45 Mahrmaid kernel: bDescriptorType = 05
Oct 23 22:41:45 Mahrmaid kernel: bEndpointAddress = 02 (out)
Oct 23 22:41:45 Mahrmaid kernel: bmAttributes = 02 (Bulk)
Oct 23 22:41:45 Mahrmaid kernel: wMaxPacketSize = 0040
Oct 23 22:41:45 Mahrmaid kernel: bInterval = 00
Oct 23 22:41:45 Mahrmaid kernel: Endpoint:
Oct 23 22:41:45 Mahrmaid kernel: bLength = 7
Oct 23 22:41:45 Mahrmaid kernel: bDescriptorType = 05
Oct 23 22:41:45 Mahrmaid kernel: bEndpointAddress = 81 (in)
Oct 23 22:41:45 Mahrmaid kernel: bmAttributes = 02 (Bulk)
Oct 23 22:41:45 Mahrmaid kernel: wMaxPacketSize = 0040
Oct 23 22:41:45 Mahrmaid kernel: bInterval = 00
Oct 23 22:41:45 Mahrmaid kernel: usb.c: kusbd: /sbin/hotplug add 2
Oct 23 22:41:45 Mahrmaid kernel: hub.c: port 2, portstatus 100, change 0, 12 Mb/s
Oct 23 22:41:46 Mahrmaid kernel: Initializing USB Mass Storage driver...
Oct 23 22:41:46 Mahrmaid kernel: usb.c: registered new driver usb-storage
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: act_altsettting is 0
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: id_index calculated to be: 89
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: Array length appears to be: 91
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: USB Mass Storage device detected
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: Endpoints: In: 0xc8df4434 Out:
0xc8df4420 Int: 0x00000000 (Period 0)
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: New GUID 04ce00020000000000000000
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: GetMaxLUN command result is 1, data is 0
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: Transport: Bulk
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: Protocol: Transparent SCSI
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: *** thread sleeping.
Oct 23 22:41:46 Mahrmaid kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: queuecommand() called
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: *** thread awakened.
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: Command INQUIRY (6 bytes)
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: 12 00 00 00 ff 00 00 00 40 08 00 00
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: Bulk command S 0x43425355 T 0x6a Trg 0
LUN 0 L 255 F 128 CL 6
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: Bulk command transfer result=0
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: usb_stor_transfer_partial(): xfer 255
bytes
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred
255/255
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: usb_stor_transfer_partial(): transfer
complete
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: Bulk data transfer result 0x0
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: Attempting to get CSW...
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: Bulk status result = 0
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: Bulk status Sig 0x53425355 T 0xff0158 R
0 Stat 0x0
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: Bulk logical error
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: -- transport indicates error, resetting
Oct 23 22:41:46 Mahrmaid kernel: usb-storage: Bulk reset requested
Oct 23 22:41:52 Mahrmaid kernel: usb-storage: command_abort() called
Oct 23 22:41:52 Mahrmaid kernel: usb-storage: usb_stor_clear_halt: result=-104
Oct 23 22:41:52 Mahrmaid kernel: usb-storage: usb_stor_clear_halt: result=0
Oct 23 22:41:52 Mahrmaid kernel: usb-storage: Bulk soft reset completed
Oct 23 22:41:52 Mahrmaid kernel: usb-storage: scsi cmd done, result=0x70000
Oct 23 22:41:52 Mahrmaid kernel: usb-storage: *** thread sleeping.
--
Christian Mahr (privat) [EMAIL PROTECTED]
-------------------------------------------------------
This sf.net email is sponsored by: Influence the future
of Java(TM) technology. Join the Java Community
Process(SM) (JCP(SM)) program now.
http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
