Dear Matthe, dear all
again on the "Argosy HF530" Hard disk enclosure.
I did not find any firmware update for thies device neither at "argosy" not at cypress
which
seem to have bought scanlogic.
What I found was a old patch from Peter Waechtler and Rene Engelhard which I adapted to
2.4.20-pre11.
The main thing is that the "bcs->Tag" does not appear to be correct in the
communication.
If you ignore the variable for this specific device, everything works fine.
Is there somebody out who can qualify this patch to be integrated into the main
development
stream?
Yours
Christian
------------------ patch for Argosy HD 530 -----------------------
--- ./drivers/usb/storage/usb.h.org Sat Oct 26 15:00:20 2002
+++ ./drivers/usb/storage/usb.h Sat Oct 26 15:01:35 2002
@@ -101,6 +101,7 @@
#define US_FL_IGNORE_SER 0x00000010 /* Ignore the serial number given */
#define US_FL_SCM_MULT_TARG 0x00000020 /* supports multiple targets */
#define US_FL_FIX_INQUIRY 0x00000040 /* INQUIRY response needs fixing */
+#define US_FL_SL_IDE_BUG 0x00000100 /* Scanlogic usb-ide workaround */
#define USB_STOR_STRING_LEN 32
--- ./drivers/usb/storage/usb.c.org Fri Oct 25 00:14:24 2002
+++ ./drivers/usb/storage/usb.c Fri Oct 25 00:14:49 2002
@@ -468,7 +468,12 @@
US_DEBUGP("scsi cmd done, result=0x%x\n",
us->srb->result);
set_current_state(TASK_INTERRUPTIBLE);
- us->srb->scsi_done(us->srb);
+/*05-Apr-02 cm*/
+ if (us->srb->scsi_done)
+ us->srb->scsi_done(us->srb);
+ US_DEBUGP("scsi_done() called\n");
+ if (us->srb->result == DID_ERROR << 16) /* scsi_abort may wait here */
+ complete(&(us->notify));
} else {
US_DEBUGP("scsi command aborted\n");
set_current_state(TASK_INTERRUPTIBLE);
--- ./drivers/usb/storage/unusual_devs.h.org Fri Oct 25 00:41:13 2002
+++ ./drivers/usb/storage/unusual_devs.h Sat Oct 26 17:46:42 2002
@@ -111,6 +111,17 @@
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_FIX_INQUIRY),
+/* reported by Christian Mahr <[EMAIL PROTECTED]>
+ * works on "Argosy HD530" harddisk enclosure.
+ */
+UNUSUAL_DEV( 0x04ce, 0x0002, 0x0260, 0x0260,
+ "USB to IDE",
+ "USB to IDE",
+ US_SC_SCSI, US_PR_BULK, NULL,
+ US_FL_FIX_INQUIRY | US_FL_SL_IDE_BUG),
+
+
+
/* Reported by Kriston Fincher <[EMAIL PROTECTED]>
* Patch submitted by Sean Millichamp <[EMAIL PROTECTED]>
* This is to support the Panasonic PalmCam PV-SD4090
--- ./drivers/usb/storage/transport.c.org Sat Oct 26 15:04:28 2002
+++ ./drivers/usb/storage/transport.c Sat Oct 26 15:08:51 2002
@@ -1234,7 +1234,7 @@
le32_to_cpu(bcs->Signature), bcs->Tag,
bcs->Residue, bcs->Status);
if (bcs->Signature != cpu_to_le32(US_BULK_CS_SIGN) ||
- bcs->Tag != bcb->Tag ||
+ ( (bcs->Tag != bcb->Tag) && (!(us->flags & US_FL_SL_IDE_BUG)) ) ||
bcs->Status > US_BULK_STAT_PHASE || partial != 13) {
US_DEBUGP("Bulk logical error\n");
ret = USB_STOR_TRANSPORT_ERROR;
-------------------
Matthew Dharm schrieb:
> You need the firmware update which (I'm told) is located on the ScanLogic
> web site.
>
> Matt
>
> On Thu, Oct 24, 2002 at 11:53:08PM +0200, Christian Mahr wrote:
> >
> > Hi David, Hi all,
> >
> >
> > I applied the patch usb-ehci-2.4.20-pre11.patch recommend by david to
>2.4.20-pre11, but not
> > with much luck:
> >
> > I connect a "Argosy HD530 disc enclosure" with a standard 2.5 inch drive. Host is
>NEC-type
> > After connecting the drive I observe 2 process to be in "D" and "DW" state:
> >
> > 2412 ? S 0:00 /bin/bash /etc/hotplug/usb.agent
> > 2413 ? S 0:00 logger -t /etc/hotplug/usb.agent[2402]
> > 2430 ? D 0:00 /sbin/modprobe -vs usb-storage
> > 2431 ? SW 0:00 [usb-storage-0]
> > 2432 ? DW 0:00 [scsi_eh_1]
> >
> > The drive does not show up in /proc/scsi/scsi:
> >
> > Host: scsi1 Channel: 00 Id: 00 Lun: 00
> > Vendor: Model: Rev:
> > Type: <NULL> ANSI SCSI revision: ffffffff
> >
> > and "usbview" becomes stuck. Only rebooting does resolve the issue.
> >
> > The /var/log/messages is at the bottom:
> >
> > One strange observation:
> >
> > The drive has the code 04CE/0002 and shows as "USB to IDE"/"USB to IDE" whereas
>the file
> > unusual_dev.h tells:
> > UNUSUAL_DEV( 0x04ce, 0x0002, 0x0074, 0x0074,
> > "ScanLogic",
> > "SL11R-IDE",
> > US_SC_SCSI, US_PR_BULK, NULL,
> > US_FL_FIX_INQUIRY),
> >
> > this sounds strange to me...
> >
> > Any hints what I can try?
> >
> > Regards
> > Christian
> >
> > ------------------/var/log/messages----------------------------------
> > Oct 24 23:34:41 Mahrmaid syslogd 1.4.1: restart.
> > Oct 24 23:35:31 Mahrmaid kernel: hub.c: port 1, portstatus 100, change 0, 12 Mb/s
> > Oct 24 23:35:31 Mahrmaid kernel: ehci-hub.c: GetStatus port 2 status 001803 POWER
>sig=j
> > CSC CONNECT
> > Oct 24 23:35:31 Mahrmaid kernel: hub.c: port 2, portstatus 501, change 1, 480 Mb/s
> > Oct 24 23:35:31 Mahrmaid kernel: hub.c: port 2 connection change
> > Oct 24 23:35:31 Mahrmaid kernel: hub.c: port 2, portstatus 501, change 1, 480 Mb/s
> > Oct 24 23:35:31 Mahrmaid kernel: klogd 1.4.1, -------
> > -- state change ----------
> > Oct 24 23:35:31 Mahrmaid kernel: Inspecting /boot/System.map
> > Oct 24 23:35:32 Mahrmaid kernel: Symbol table has incorrect version number.
> > Oct 24 23:35:32 Mahrmaid kernel: Cannot find map file.
> > Oct 24 23:35:32 Mahrmaid kernel: Loaded 1131 symbols from 56 modules.
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 2, portstatus 501, change 0, 480 Mb/s
> > Oct 24 23:35:32 Mahrmaid last message repeated 3 times
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 2, portstatus 511, change 0, 480 Mb/s
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 2 of hub 1 not reset yet, waiting 10ms
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 2, portstatus 511, change 0, 480 Mb/s
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 2 of hub 1 not reset yet, waiting 10ms
> > Oct 24 23:35:32 Mahrmaid kernel: ehci-hub.c: 00:12.2 port 2 full speed, give to
>companion,
> > 0x1801
> > Oct 24 23:35:32 Mahrmaid kernel: ehci-hub.c: GetStatus port 2 status 003801 POWER
>OWNER
> > sig=j CONNECT
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 2, portstatus 0, change 10, 12 Mb/s
> > Oct 24 23:35:32 Mahrmaid kernel: ehci-hcd.c: 00:12.2: free_config devnum 0
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 3, portstatus 100, change 0, 12 Mb/s
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 4, portstatus 100, change 0, 12 Mb/s
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 5, portstatus 100, change 0, 12 Mb/s
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 1 connection change
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 1, portstatus 101, change 0, 12 Mb/s
> > Oct 24 23:35:32 Mahrmaid last message repeated 3 times
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 1, portstatus 103, change 10, 12 Mb/s
> > Oct 24 23:35:32 Mahrmaid kernel: hub.c: new USB device 00:12.1-1, assigned address
>2
> > Oct 24 23:35:32 Mahrmaid kernel: usb.c: kmalloc IF c48d59c0, numif 1
> > Oct 24 23:35:32 Mahrmaid kernel: usb.c: new device strings: Mfr=1, Product=1,
> > SerialNumber=0
> > Oct 24 23:35:32 Mahrmaid kernel: usb.c: USB device number 2 default language ID
>0x409
> > Oct 24 23:35:32 Mahrmaid kernel: Manufacturer: USB to IDE
> > Oct 24 23:35:32 Mahrmaid kernel: Product: USB to IDE
> > Oct 24 23:35:32 Mahrmaid kernel: usb.c: unhandled interfaces on device
> > Oct 24 23:35:32 Mahrmaid kernel: usb.c: USB device 2 (vend/prod 0x4ce/0x2) is not
>claimed
> > by any active driver.
> > Oct 24 23:35:32 Mahrmaid kernel: Length = 18
> > Oct 24 23:35:32 Mahrmaid kernel: DescriptorType = 01
> > Oct 24 23:35:32 Mahrmaid kernel: USB version = 1.10
> > Oct 24 23:35:32 Mahrmaid kernel: Vendor:Product = 04ce:0002
> > Oct 24 23:35:32 Mahrmaid kernel: MaxPacketSize0 = 8
> > Oct 24 23:35:32 Mahrmaid kernel: NumConfigurations = 1
> > Oct 24 23:35:32 Mahrmaid kernel: Device version = 2.60
> > Oct 24 23:35:32 Mahrmaid kernel: Device Class:SubClass:Protocol = 00:00:00
> > Oct 24 23:35:32 Mahrmaid kernel: Per-interface classes
> > Oct 24 23:35:32 Mahrmaid kernel: Configuration:
> > Oct 24 23:35:32 Mahrmaid kernel: bLength = 9
> > Oct 24 23:35:32 Mahrmaid kernel: bDescriptorType = 02
> > Oct 24 23:35:32 Mahrmaid kernel: wTotalLength = 0020
> > Oct 24 23:35:32 Mahrmaid kernel: bNumInterfaces = 01
> > Oct 24 23:35:32 Mahrmaid kernel: bConfigurationValue = 01
> > Oct 24 23:35:32 Mahrmaid kernel: iConfiguration = 00
> > Oct 24 23:35:32 Mahrmaid kernel: bmAttributes = 40
> > Oct 24 23:35:32 Mahrmaid kernel: MaxPower = 0mA
> > Oct 24 23:35:32 Mahrmaid kernel:
> > Oct 24 23:35:32 Mahrmaid kernel: Interface: 0
> > Oct 24 23:35:32 Mahrmaid kernel: Alternate Setting: 0
> > Oct 24 23:35:32 Mahrmaid kernel: bLength = 9
> > Oct 24 23:35:32 Mahrmaid kernel: bDescriptorType = 04
> > Oct 24 23:35:32 Mahrmaid kernel: bInterfaceNumber = 00
> > Oct 24 23:35:32 Mahrmaid kernel: bAlternateSetting = 00
> > Oct 24 23:35:32 Mahrmaid kernel: bNumEndpoints = 02
> > Oct 24 23:35:32 Mahrmaid kernel: bInterface Class:SubClass:Protocol =
>08:06:50
> > Oct 24 23:35:32 Mahrmaid kernel: iInterface = 00
> > Oct 24 23:35:32 Mahrmaid kernel: Endpoint:
> > Oct 24 23:35:32 Mahrmaid kernel: bLength = 7
> > Oct 24 23:35:32 Mahrmaid kernel: bDescriptorType = 05
> > Oct 24 23:35:32 Mahrmaid kernel: bEndpointAddress = 02 (out)
> > Oct 24 23:35:33 Mahrmaid kernel: bmAttributes = 02 (Bulk)
> > Oct 24 23:35:33 Mahrmaid kernel: wMaxPacketSize = 0040
> > Oct 24 23:35:33 Mahrmaid kernel: bInterval = 00
> > Oct 24 23:35:33 Mahrmaid kernel: Endpoint:
> > Oct 24 23:35:33 Mahrmaid kernel: bLength = 7
> > Oct 24 23:35:33 Mahrmaid kernel: bDescriptorType = 05
> > Oct 24 23:35:33 Mahrmaid kernel: bEndpointAddress = 81 (in)
> > Oct 24 23:35:33 Mahrmaid kernel: bmAttributes = 02 (Bulk)
> > Oct 24 23:35:33 Mahrmaid kernel: wMaxPacketSize = 0040
> > Oct 24 23:35:33 Mahrmaid kernel: bInterval = 00
> > Oct 24 23:35:33 Mahrmaid kernel: usb.c: kusbd: /sbin/hotplug add 2
> > Oct 24 23:35:33 Mahrmaid kernel: hub.c: port 2, portstatus 100, change 0, 12 Mb/s
> > Oct 24 23:35:33 Mahrmaid kernel: Initializing USB Mass Storage driver...
> > Oct 24 23:35:33 Mahrmaid kernel: usb.c: registered new driver usb-storage
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: act_altsettting is 0
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: id_index calculated to be: 89
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Array length appears to be: 91
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: USB Mass Storage device detected
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Endpoints: In: 0xc55c2734 Out:
>0xc55c2720
> > Int: 0x00000000 (Period 0)
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: New GUID 04ce00020000000000000000
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: GetMaxLUN command result is 1, data
>is 0
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Transport: Bulk
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Protocol: Transparent SCSI
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: *** thread sleeping.
> > Oct 24 23:35:33 Mahrmaid kernel: scsi1 : SCSI emulation for USB Mass Storage
>devices
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: queuecommand() called
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: *** thread awakened.
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Command INQUIRY (6 bytes)
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: 12 00 00 00 ff 00 00 00 28 08 00 00
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk command S 0x43425355 T 0x6a Trg
>0 LUN 0
> > L 255 F 128 CL 6
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk command transfer result=0
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: usb_stor_transfer_partial(): xfer
>255 bytes
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: usb_stor_bulk_msg() returned 0
>xferred
> > 255/255
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: usb_stor_transfer_partial(): transfer
> > complete
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk data transfer result 0x0
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Attempting to get CSW...
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk status result = 0
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk status Sig 0x53425355 T
>0xff0158 R 0
> > Stat 0x0
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk logical error
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: -- transport indicates error,
>resetting
> > Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk reset requested
> > Oct 24 23:35:39 Mahrmaid kernel: usb-storage: command_abort() called
> > Oct 24 23:35:39 Mahrmaid kernel: usb-storage: usb_stor_clear_halt: result=0
> > Oct 24 23:35:39 Mahrmaid kernel: usb-storage: usb_stor_clear_halt: result=0
> > Oct 24 23:35:39 Mahrmaid kernel: usb-storage: Bulk soft reset completed
> > Oct 24 23:35:39 Mahrmaid kernel: usb-storage: scsi cmd done, result=0x70000
> > Oct 24 23:35:39 Mahrmaid kernel: usb-storage: *** thread sleeping.
> >
> >
> >
> >
> >
> >
> > David Brownell schrieb:
> >
> > > > Sorry I forgot to name
> >
> > > > kernel 2.4.19-pre11
> > > >
> > > > and the USB port:
> > > >
> > > > "NEC corporation USB 2.0"
> > >
> > > In that case upgrade your kernel and try this patch:
> > >
> > >
>http://www.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-ehci-2.4.20-pre11.patch
> > >
> > > It might very well solve your problem.
> > >
> > > - Dave
> > >
> > > -------------------------------------------------------
> > > This sf.net email is sponsored by: Influence the future
> > > of Java(TM) technology. Join the Java Community
> > > Process(SM) (JCP(SM)) program now.
> > > http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en
> > >
> > > _______________________________________________
> > > [EMAIL PROTECTED]
> > > To unsubscribe, use the last form field at:
> > > https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
> >
> > --
> > Christian Mahr (privat) [EMAIL PROTECTED]
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > -------------------------------------------------------
> > This sf.net email is sponsored by: Influence the future
> > of Java(TM) technology. Join the Java Community
> > Process(SM) (JCP(SM)) program now.
> > http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0003en
> > _______________________________________________
> > [EMAIL PROTECTED]
> > To unsubscribe, use the last form field at:
> > https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
>
> --
> Matthew Dharm Home: [EMAIL PROTECTED]
> Maintainer, Linux USB Mass Storage Driver
>
> Da. Am thinkink of carbonated borscht for lonk nights of coding.
> -- Pitr
> User Friendly, 7/24/1998
>
> ------------------------------------------------------------------------
> Part 1.2Type: application/pgp-signature
--
Christian Mahr (privat) [EMAIL PROTECTED]
-------------------------------------------------------
This SF.net email is sponsored by: ApacheCon, November 18-21 in
Las Vegas (supported by COMDEX), the only Apache event to be
fully supported by the ASF. http://www.apachecon.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
