You need the firmware update which (I'm told) is located on the ScanLogic
web site.

Matt

On Thu, Oct 24, 2002 at 11:53:08PM +0200, Christian Mahr wrote:
> 
> Hi David, Hi all,
> 
> 
> I applied the patch usb-ehci-2.4.20-pre11.patch recommend by david to 2.4.20-pre11, 
>but not
> with much luck:
> 
> I connect a "Argosy HD530 disc enclosure" with a standard 2.5 inch drive. Host is 
>NEC-type
> After connecting the drive I observe 2 process  to be in "D" and "DW" state:
> 
>  2412 ?        S      0:00 /bin/bash /etc/hotplug/usb.agent
>  2413 ?        S      0:00 logger -t /etc/hotplug/usb.agent[2402]
>  2430 ?        D      0:00 /sbin/modprobe -vs usb-storage
>  2431 ?        SW     0:00 [usb-storage-0]
>  2432 ?        DW     0:00 [scsi_eh_1]
> 
> The drive does not show up in /proc/scsi/scsi:
> 
> Host: scsi1 Channel: 00 Id: 00 Lun: 00
>   Vendor:          Model:                  Rev:
>   Type:   <NULL>                ANSI SCSI revision: ffffffff
> 
> and "usbview" becomes stuck.  Only rebooting does resolve the issue.
> 
> The /var/log/messages is at the bottom:
> 
> One strange observation:
> 
> The drive has the code 04CE/0002 and shows as "USB to IDE"/"USB to IDE"  whereas the 
>file
> unusual_dev.h tells:
> UNUSUAL_DEV(  0x04ce, 0x0002, 0x0074, 0x0074,
>                 "ScanLogic",
>                 "SL11R-IDE",
>                 US_SC_SCSI, US_PR_BULK, NULL,
>                 US_FL_FIX_INQUIRY),
> 
> this sounds strange to me...
> 
> Any hints what I can try?
> 
> Regards
>     Christian
> 
> ------------------/var/log/messages----------------------------------
> Oct 24 23:34:41 Mahrmaid syslogd 1.4.1: restart.
> Oct 24 23:35:31 Mahrmaid kernel: hub.c: port 1, portstatus 100, change 0, 12 Mb/s
> Oct 24 23:35:31 Mahrmaid kernel: ehci-hub.c: GetStatus port 2 status 001803 POWER 
>sig=j
> CSC CONNECT
> Oct 24 23:35:31 Mahrmaid kernel: hub.c: port 2, portstatus 501, change 1, 480 Mb/s
> Oct 24 23:35:31 Mahrmaid kernel: hub.c: port 2 connection change
> Oct 24 23:35:31 Mahrmaid kernel: hub.c: port 2, portstatus 501, change 1, 480 Mb/s
> Oct 24 23:35:31 Mahrmaid kernel: klogd 1.4.1, -------
> -- state change ----------
> Oct 24 23:35:31 Mahrmaid kernel: Inspecting /boot/System.map
> Oct 24 23:35:32 Mahrmaid kernel: Symbol table has incorrect version number.
> Oct 24 23:35:32 Mahrmaid kernel: Cannot find map file.
> Oct 24 23:35:32 Mahrmaid kernel: Loaded 1131 symbols from 56 modules.
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 2, portstatus 501, change 0, 480 Mb/s
> Oct 24 23:35:32 Mahrmaid last message repeated 3 times
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 2, portstatus 511, change 0, 480 Mb/s
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 2 of hub 1 not reset yet, waiting 10ms
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 2, portstatus 511, change 0, 480 Mb/s
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 2 of hub 1 not reset yet, waiting 10ms
> Oct 24 23:35:32 Mahrmaid kernel: ehci-hub.c: 00:12.2 port 2 full speed, give to 
>companion,
> 0x1801
> Oct 24 23:35:32 Mahrmaid kernel: ehci-hub.c: GetStatus port 2 status 003801 POWER 
>OWNER
> sig=j  CONNECT
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 2, portstatus 0, change 10, 12 Mb/s
> Oct 24 23:35:32 Mahrmaid kernel: ehci-hcd.c: 00:12.2: free_config devnum 0
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 3, portstatus 100, change 0, 12 Mb/s
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 4, portstatus 100, change 0, 12 Mb/s
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 5, portstatus 100, change 0, 12 Mb/s
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 1 connection change
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 1, portstatus 101, change 0, 12 Mb/s
> Oct 24 23:35:32 Mahrmaid last message repeated 3 times
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: port 1, portstatus 103, change 10, 12 Mb/s
> Oct 24 23:35:32 Mahrmaid kernel: hub.c: new USB device 00:12.1-1, assigned address 2
> Oct 24 23:35:32 Mahrmaid kernel: usb.c: kmalloc IF c48d59c0, numif 1
> Oct 24 23:35:32 Mahrmaid kernel: usb.c: new device strings: Mfr=1, Product=1,
> SerialNumber=0
> Oct 24 23:35:32 Mahrmaid kernel: usb.c: USB device number 2 default language ID 0x409
> Oct 24 23:35:32 Mahrmaid kernel: Manufacturer: USB to IDE
> Oct 24 23:35:32 Mahrmaid kernel: Product: USB to IDE
> Oct 24 23:35:32 Mahrmaid kernel: usb.c: unhandled interfaces on device
> Oct 24 23:35:32 Mahrmaid kernel: usb.c: USB device 2 (vend/prod 0x4ce/0x2) is not 
>claimed
> by any active driver.
> Oct 24 23:35:32 Mahrmaid kernel:   Length              = 18
> Oct 24 23:35:32 Mahrmaid kernel:   DescriptorType      = 01
> Oct 24 23:35:32 Mahrmaid kernel:   USB version         = 1.10
> Oct 24 23:35:32 Mahrmaid kernel:   Vendor:Product      = 04ce:0002
> Oct 24 23:35:32 Mahrmaid kernel:   MaxPacketSize0      = 8
> Oct 24 23:35:32 Mahrmaid kernel:   NumConfigurations   = 1
> Oct 24 23:35:32 Mahrmaid kernel:   Device version      = 2.60
> Oct 24 23:35:32 Mahrmaid kernel:   Device Class:SubClass:Protocol = 00:00:00
> Oct 24 23:35:32 Mahrmaid kernel:     Per-interface classes
> Oct 24 23:35:32 Mahrmaid kernel: Configuration:
> Oct 24 23:35:32 Mahrmaid kernel:   bLength             =    9
> Oct 24 23:35:32 Mahrmaid kernel:   bDescriptorType     =   02
> Oct 24 23:35:32 Mahrmaid kernel:   wTotalLength        = 0020
> Oct 24 23:35:32 Mahrmaid kernel:   bNumInterfaces      =   01
> Oct 24 23:35:32 Mahrmaid kernel:   bConfigurationValue =   01
> Oct 24 23:35:32 Mahrmaid kernel:   iConfiguration      =   00
> Oct 24 23:35:32 Mahrmaid kernel:   bmAttributes        =   40
> Oct 24 23:35:32 Mahrmaid kernel:   MaxPower            =    0mA
> Oct 24 23:35:32 Mahrmaid kernel:
> Oct 24 23:35:32 Mahrmaid kernel:   Interface: 0
> Oct 24 23:35:32 Mahrmaid kernel:   Alternate Setting:  0
> Oct 24 23:35:32 Mahrmaid kernel:     bLength             =    9
> Oct 24 23:35:32 Mahrmaid kernel:     bDescriptorType     =   04
> Oct 24 23:35:32 Mahrmaid kernel:     bInterfaceNumber    =   00
> Oct 24 23:35:32 Mahrmaid kernel:     bAlternateSetting   =   00
> Oct 24 23:35:32 Mahrmaid kernel:     bNumEndpoints       =   02
> Oct 24 23:35:32 Mahrmaid kernel:     bInterface Class:SubClass:Protocol =   08:06:50
> Oct 24 23:35:32 Mahrmaid kernel:     iInterface          =   00
> Oct 24 23:35:32 Mahrmaid kernel:     Endpoint:
> Oct 24 23:35:32 Mahrmaid kernel:       bLength             =    7
> Oct 24 23:35:32 Mahrmaid kernel:       bDescriptorType     =   05
> Oct 24 23:35:32 Mahrmaid kernel:       bEndpointAddress    =   02 (out)
> Oct 24 23:35:33 Mahrmaid kernel:       bmAttributes        =   02 (Bulk)
> Oct 24 23:35:33 Mahrmaid kernel:       wMaxPacketSize      = 0040
> Oct 24 23:35:33 Mahrmaid kernel:       bInterval           =   00
> Oct 24 23:35:33 Mahrmaid kernel:     Endpoint:
> Oct 24 23:35:33 Mahrmaid kernel:       bLength             =    7
> Oct 24 23:35:33 Mahrmaid kernel:       bDescriptorType     =   05
> Oct 24 23:35:33 Mahrmaid kernel:       bEndpointAddress    =   81 (in)
> Oct 24 23:35:33 Mahrmaid kernel:       bmAttributes        =   02 (Bulk)
> Oct 24 23:35:33 Mahrmaid kernel:       wMaxPacketSize      = 0040
> Oct 24 23:35:33 Mahrmaid kernel:       bInterval           =   00
> Oct 24 23:35:33 Mahrmaid kernel: usb.c: kusbd: /sbin/hotplug add 2
> Oct 24 23:35:33 Mahrmaid kernel: hub.c: port 2, portstatus 100, change 0, 12 Mb/s
> Oct 24 23:35:33 Mahrmaid kernel: Initializing USB Mass Storage driver...
> Oct 24 23:35:33 Mahrmaid kernel: usb.c: registered new driver usb-storage
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: act_altsettting is 0
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: id_index calculated to be: 89
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Array length appears to be: 91
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: USB Mass Storage device detected
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Endpoints: In: 0xc55c2734 Out: 
>0xc55c2720
> Int: 0x00000000 (Period 0)
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: New GUID 04ce00020000000000000000
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: GetMaxLUN command result is 1, data is >0
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Transport: Bulk
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Protocol: Transparent SCSI
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: *** thread sleeping.
> Oct 24 23:35:33 Mahrmaid kernel: scsi1 : SCSI emulation for USB Mass Storage devices
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: queuecommand() called
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: *** thread awakened.
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Command INQUIRY (6 bytes)
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: 12 00 00 00 ff 00 00 00 28 08 00 00
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk command S 0x43425355 T 0x6a Trg 0 
>LUN 0
> L 255 F 128 CL 6
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk command transfer result=0
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: usb_stor_transfer_partial(): xfer 255 
>bytes
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred
> 255/255
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: usb_stor_transfer_partial(): transfer
> complete
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk data transfer result 0x0
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Attempting to get CSW...
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk status result = 0
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk status Sig 0x53425355 T 0xff0158 
>R 0
> Stat 0x0
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk logical error
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: -- transport indicates error, resetting
> Oct 24 23:35:33 Mahrmaid kernel: usb-storage: Bulk reset requested
> Oct 24 23:35:39 Mahrmaid kernel: usb-storage: command_abort() called
> Oct 24 23:35:39 Mahrmaid kernel: usb-storage: usb_stor_clear_halt: result=0
> Oct 24 23:35:39 Mahrmaid kernel: usb-storage: usb_stor_clear_halt: result=0
> Oct 24 23:35:39 Mahrmaid kernel: usb-storage: Bulk soft reset completed
> Oct 24 23:35:39 Mahrmaid kernel: usb-storage: scsi cmd done, result=0x70000
> Oct 24 23:35:39 Mahrmaid kernel: usb-storage: *** thread sleeping.
> 
> 
> 
> 
> 
> 
> David Brownell schrieb:
> 
> > > Sorry I forgot to name
> 
> > >         kernel        2.4.19-pre11
> > >
> > >    and the USB port:
> > >
> > >        "NEC corporation USB 2.0"
> >
> > In that case upgrade your kernel and try this patch:
> >
> > 
>http://www.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-ehci-2.4.20-pre11.patch
> >
> > It might very well solve your problem.
> >
> > - Dave
> >
> > -------------------------------------------------------
> > This sf.net email is sponsored by: Influence the future
> > of Java(TM) technology. Join the Java Community
> > Process(SM) (JCP(SM)) program now.
> > http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en
> >
> > _______________________________________________
> > [EMAIL PROTECTED]
> > To unsubscribe, use the last form field at:
> > https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
> 
> --
> Christian Mahr (privat)                  [EMAIL PROTECTED]
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by: Influence the future 
> of Java(TM) technology. Join the Java Community 
> Process(SM) (JCP(SM)) program now. 
> http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0003en
> _______________________________________________
> [EMAIL PROTECTED]
> To unsubscribe, use the last form field at:
> https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

-- 
Matthew Dharm                              Home: [EMAIL PROTECTED] 
Maintainer, Linux USB Mass Storage Driver

Da.  Am thinkink of carbonated borscht for lonk nights of coding.
                                        -- Pitr
User Friendly, 7/24/1998

Attachment: msg08851/pgp00000.pgp
Description: PGP signature

Reply via email to