On Sat, 16 Oct 2004, Mike Yates wrote: > This is the 250Gb HDD > > T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=07ab ProdID=fc01 Rev= 9.21 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> This is my old Freecom CD-RW which has worked OK since Linux 2.0 > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=07ab ProdID=fccd Rev= 4.06 > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 10mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Are you sure you didn't get these two reversed? Try getting the entries again, each time plugging in only one of the two drives. Include the dmesg output as you plug in each one. Also, try to make sure that hotplug is disabled and usb-storage isn't loaded. My hope is that this will prevent the drives from getting into an error condition. Alan Stern ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
