Messages by Date
-
2008/01/17
Re: Endian problem when accessing internel regs on 8347
Ben Warren
-
2008/01/17
I have some problem about BDI 2000
Sdeven.Lee
-
2008/01/17
Re: TQM860L cross compilation problem
raul . moreno
-
2008/01/17
TQM860L cross compilation problem
Iring, Peter
-
2008/01/16
SCHED_FIFO & System()
Matias Sundman
-
2008/01/16
Endian problem when accessing internel regs on 8347
Bruce_Leonard
-
2008/01/16
Re: ml310 kernel2.6 booting problems
Grant Likely
-
2008/01/16
Re: ml310 kernel2.6 booting problems
Joachim Meyer
-
2008/01/16
Re: ml310 kernel2.6 booting problems
Grant Likely
-
2008/01/16
ml310 kernel2.6 booting problems
Joachim Meyer
-
2008/01/16
Re: i2c device for a linux 2.6 in XUPV2P
greenlean
-
2008/01/16
MPC52xx problems with fec-driver
Mehlan, Markus (Ritter Elektronik)
-
2008/01/16
PPC440SPe: generating PCIe INTx
kannappan
-
2008/01/15
MPIC ISU
vb
-
2008/01/15
Re: Driver - HDLC 83xx QUICC Engine??
Joakim Tjernlund
-
2008/01/15
SV: Driver - HDLC 83xx QUICC Engine??
Joakim Tjernlund
-
2008/01/15
RE: Driver - HDLC 83xx QUICC Engine??
Russell McGuire
-
2008/01/15
kernel 2.4 for virtex 2
Joachim Meyer
-
2008/01/15
Linux with e500 v2 core, can we support Ram base address starting at 0x1_0000_0000
Subbu Linux
-
2008/01/15
Re: Problems with serial and DHCP when booting from NFS
Josh Boyer
-
2008/01/15
Driver - HDLC 83xx QUICC Engine??
Russell McGuire
-
2008/01/15
Problems with serial and DHCP when booting from NFS
lipeng
-
2008/01/15
RE: MPC5200B SPI codec error when there is a heavy ethernet
Albrecht Moll
-
2008/01/15
Re: PPC vs POWERPC
Matias Sundman
-
2008/01/15
Re: PPC vs POWERPC
Jon Loeliger
-
2008/01/15
Re: PPC vs POWERPC
Scott Wood
-
2008/01/15
MPC5200B SPI codec error when there is a heavy ethernet traffic.
Txema Lopez
-
2008/01/15
Re: PPC vs POWERPC
Jon Loeliger
-
2008/01/15
problem with CF
raul . moreno
-
2008/01/15
Re: PPC vs POWERPC
Matias Sundman
-
2008/01/15
USB Mass Storare (PCI Based)
Ansari
-
2008/01/14
Re: Problem booting Linux 2.6 on Virtex-4
Enno Lübbers
-
2008/01/14
Re: Using USB on ML403
Grant Likely
-
2008/01/14
Using USB on ML403
Yedu Jathavedan
-
2008/01/14
Re: Problem booting Linux 2.6 on Virtex-4
David Baird
-
2008/01/14
Re: Problem booting Linux 2.6 on Virtex-4
David Baird
-
2008/01/14
Re: I2C and CAN bus on MPC5200B device tree
David Gibson
-
2008/01/14
Re: Re: Linux for ml310
Joachim Meyer
-
2008/01/14
RE: Problem booting Linux 2.6 on Virtex-4
Stephen Neuendorffer
-
2008/01/14
Re: Problem booting Linux 2.6 on Virtex-4
David Baird
-
2008/01/14
Re: I2C and CAN bus on MPC5200B device tree
Scott Wood
-
2008/01/14
RE: Linux for ml310
Stephen Neuendorffer
-
2008/01/14
Re: Linux for ml310
greenlean
-
2008/01/14
Re: I2C and CAN bus on MPC5200B device tree
Grant Likely
-
2008/01/14
Re: Problem booting Linux 2.6 on Virtex-4
Enno Lübbers
-
2008/01/14
Re: I2C and CAN bus on MPC5200B device tree
Wolfgang Grandegger
-
2008/01/13
Problem booting Linux 2.6 on Virtex-4
David Baird
-
2008/01/13
Re: I2C and CAN bus on MPC5200B device tree
Olof Johansson
-
2008/01/13
Re: I2C and CAN bus on MPC5200B device tree
Grant Likely
-
2008/01/13
I2C and CAN bus on MPC5200B device tree
Matt Sealey
-
2008/01/11
Re: 2.6.22-ppc8xx fec.c bugs
Scott Wood
-
2008/01/11
Re: Linux for ml310
Enno Lübbers
-
2008/01/11
Re: PPC vs POWERPC
Grant Likely
-
2008/01/11
PPC vs POWERPC
samppa
-
2008/01/11
Re: 2.6.22-ppc8xx fec.c bugs
raul . moreno
-
2008/01/10
Is it required to develope new hub class driver for MPC8272 in Montavista ?
Smily santhosh
-
2008/01/10
RE: In PowerPC's feature, are there any difference between ML410 and ML403?
Stephen Neuendorffer
-
2008/01/10
Re: 2.6.22-ppc8xx fec.c bugs
Scott Wood
-
2008/01/10
2.6.22-ppc8xx fec.c bugs
raul . moreno
-
2008/01/10
Re: Linux for ml310
Grant Likely
-
2008/01/10
Re: Toolchain for Freescale e200
Kumar Gala
-
2008/01/10
Re: Linux for ml310
Joachim Meyer
-
2008/01/10
Re: Linux for ml310
Grant Likely
-
2008/01/10
In PowerPC's feature, are there any difference between ML410 and ML403?
diak sim
-
2008/01/10
Re: Linux for ml310
Joachim Meyer
-
2008/01/09
Re: Linux for ml310
Grant Likely
-
2008/01/09
Re: Generic MMC-over-SPI binding?
Arnd Bergmann
-
2008/01/09
Re: Linux for ml310
Joachim Meyer
-
2008/01/09
Re: [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers
Matvejchikov Ilya
-
2008/01/09
Re: [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers
Matvejchikov Ilya
-
2008/01/09
Re: [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers
Matvejchikov Ilya
-
2008/01/09
Trying 10/HALF
Siva Prasad
-
2008/01/09
Re: Linux for ml310
Grant Likely
-
2008/01/09
Re: Use 2G RAM in 8548, vmalloc fail, adjust_total_lowmem
Scott Wood
-
2008/01/09
Re: Linux for ml310
Joachim Meyer
-
2008/01/09
Control not branching to the instruction present at resetvec i.e 0xfffffffc
Siva Prasad
-
2008/01/09
Re: Linux for ml310
Grant Likely
-
2008/01/09
RE: i2c device for a linux 2.6 in XUPV2P
Stephen Neuendorffer
-
2008/01/09
Re: Linux for ml310
Joachim Meyer
-
2008/01/09
Re: Generic MMC-over-SPI binding?
Simon Richter
-
2008/01/09
Toolchain for Freescale e200
Per-Erik Johansson
-
2008/01/09
RE: MMU failure, Virtex4-FX60
Stephen Neuendorffer
-
2008/01/09
Re: Use 2G RAM in 8548, vmalloc fail, adjust_total_lowmem
Dale Farnsworth
-
2008/01/09
Re: Linux for ml310
Grant Likely
-
2008/01/09
Re: Linux for ml310
Joachim Meyer
-
2008/01/08
printk() does not work on UART1
mike zheng
-
2008/01/08
Use 2G RAM in 8548, vmalloc fail, adjust_total_lowmem
jay_chen
-
2008/01/08
Re: PowerPC Cross Compiler's Arch doesnt match
Ben Warren
-
2008/01/08
Re: MMU failure, Virtex4-FX60
Robert Woodworth
-
2008/01/08
PowerPC Cross Compiler's Arch doesnt match
Jeff Parent
-
2008/01/08
Beta Release for MPC5121e Linux BSP
james . mertz
-
2008/01/08
trying to boot linux on MVME5100
Phil Howard
-
2008/01/08
error : array type has incomplete element type
Rami
-
2008/01/08
Re: Generic MMC-over-SPI binding?
Arnd Bergmann
-
2008/01/08
kernel panic after upgrading to 2.6.22
raul . moreno
-
2008/01/08
Re: Generic MMC-over-SPI binding?
Simon Richter
-
2008/01/08
Re: Generic MMC-over-SPI binding?
Robert Schwebel
-
2008/01/08
Generic MMC-over-SPI binding?
Simon Richter
-
2008/01/08
port linux-2.6 to ml410, problem on disabling external interrupts
diak sim
-
2008/01/08
PPC4xx : Failed to perform memory to memory DMA
padmanabha
-
2008/01/08
PPC4xx memory to memory DMA
padmanabha
-
2008/01/07
Re: How to config linux kernel(ARCH=powerpc)?
Josh Boyer
-
2008/01/07
Re:How to config linux kernel(ARCH=powerpc)?
tony
-
2008/01/07
How to config linux kernel(ARCH=powerpc)?
jie han
-
2008/01/07
Re: Linux for ml310
Grant Likely
-
2008/01/07
Linux for ml310
Joachim Meyer
-
2008/01/07
Re: MMU failure, Virtex4-FX60
Grant Likely
-
2008/01/07
MMU failure, Virtex4-FX60
Robert Woodworth
-
2008/01/07
Re: 83xx, ucc_geth, kernel 2.6.23, IP-Config: No network devices
Jochen Friedrich
-
2008/01/07
RE: 83xx, ucc_geth, kernel 2.6.23, IP-Config: No network devices
Russell McGuire
-
2008/01/07
Re: Howto use PPC4xx memory to memory DMA
padmanabha
-
2008/01/07
Re: 83xx, ucc_geth, kernel 2.6.23, IP-Config: No network devices
Jochen Friedrich
-
2008/01/07
83xx, ucc_geth, kernel 2.6.23, IP-Config: No network devices
Russell McGuire
-
2008/01/06
Concatenation of MTD devices
Sekhar Pedamallu
-
2008/01/05
Re: Control not branching to the instruction present at resetvec i.e 0xfffffffc
Misbah khan
-
2008/01/05
porting linux 2.6 to ml410, no output after "Now booting the kernel", and some other questions
diak sim
-
2008/01/04
Control not branching to the instruction present at resetvec i.e 0xfffffffc
ravi . rao
-
2008/01/04
RE: File system problem
mojtaba
-
2008/01/04
Re: MPC8260ADS and linux-2.6
suja Baburaj
-
2008/01/04
Re: ioremap and outb
Arnd Bergmann
-
2008/01/04
Re: ioremap and outb
Alessandro Rubini
-
2008/01/04
Re: Drivers' probe function calling order
Misbah khan
-
2008/01/04
Re: Reading a config file in a driver ....
Misbah khan
-
2008/01/04
Re: Reading a config file in a driver ....
Misbah khan
-
2008/01/03
Re: [PATCHv3] powerpc: DBox2 Board Support
David Gibson
-
2008/01/03
RE: File system problem
Jean-Samuel Chenard
-
2008/01/03
Re: Drivers' probe function calling order
Alessandro Rubini
-
2008/01/03
Re: Reading a config file in a driver ....
Carlos Munoz
-
2008/01/03
RE: MPC8260ADS and linux-2.6
Rune Torgersen
-
2008/01/03
Re: Drivers' probe function calling order
Jeff Mock
-
2008/01/03
Re: MPC8260ADS and linux-2.6
Scott Wood
-
2008/01/03
Re: File system problem
Grant Likely
-
2008/01/03
Re: File system problem
Grant Likely
-
2008/01/03
Drivers' probe function calling order
DI BACCO ANTONIO - technolabs
-
2008/01/03
RE: File system problem
mojtaba
-
2008/01/03
Re: Reading a config file in a driver ....
Olof Johansson
-
2008/01/03
RE: File system problem
mojtaba
-
2008/01/03
Re: [PATCHv3] powerpc: DBox2 Board Support
Jochen Friedrich
-
2008/01/03
Re: (no subject)
Misbah khan
-
2008/01/03
[no subject]
Awad, Sinan (GE Healthcare)
-
2008/01/02
MPC8260ADS and linux-2.6
suja Baburaj
-
2008/01/02
Reading a config file in a driver ....
Misbah khan
-
2008/01/02
RE: File system problem
Jean-Samuel Chenard
-
2008/01/02
Re: [PATCHv3] powerpc: DBox2 Board Support
David Gibson
-
2008/01/02
File system problem
mojtaba
-
2008/01/02
Re: Differences between git tree
Jon Loeliger
-
2008/01/02
Re: How to do IO mapped Implimentation ???
Misbah khan
-
2008/01/02
MTD - partioning
Sekhar Pedamallu
-
2007/12/31
Re: How to do IO mapped Implimentation ???
Jeyner Gil Caga
-
2007/12/31
Re: How to do IO mapped Implimentation ???
Misbah khan
-
2007/12/31
Re: How to do IO mapped Implimentation ???
Jeyner Gil Caga
-
2007/12/31
How to make a extern variable shared between two drivers.
Misbah khan
-
2007/12/31
Re: How to do IO mapped Implimentation ???
Misbah khan
-
2007/12/31
Re: 83xx, ELDK 2.6.23, IP-Config: No network devices
Vitaly Bordug
-
2007/12/31
Re: How to do IO mapped Implimentation ???
Jeyner Gil Caga
-
2007/12/30
Re: How to do IO mapped Implimentation ???
Misbah khan
-
2007/12/30
Re: Device node - How does kernel know about it
Brad Boyer
-
2007/12/30
83xx, ELDK 2.6.23, IP-Config: No network devices
Russell McGuire
-
2007/12/30
Re: How can I support 2GB of memory in Linux kernel on 440SPe
Vincitore
-
2007/12/30
Re: How can I support 2GB of memory in Linux kernel on 440SPe
Vincitore
-
2007/12/28
Re: How to do IO mapped Implimentation ???
Jeyner Gil Caga
-
2007/12/28
[PATCHv3] powerpc: DBox2 Board Support
Jochen Friedrich
-
2007/12/28
RE: How can I support 2GB of memory in Linux kernel on 440SPe
Rune Torgersen
-
2007/12/28
How can I support 2GB of memory in Linux kernel on 440SPe
Vincitore
-
2007/12/27
How to do IO mapped Implimentation ???
Misbah khan
-
2007/12/27
RE: Device node - How does kernel know about it
Siva Prasad
-
2007/12/27
Re: Device node - How does kernel know about it
Jon Smirl
-
2007/12/27
RE: Device node - How does kernel know about it
Siva Prasad
-
2007/12/27
Re: Using SPI in lite5200
Miguel Angel Alvarez
-
2007/12/27
Using SPI in lite5200
Miguel Angel Alvarez
-
2007/12/27
Re: Device node - How does kernel know about it
Nicholas Mc Guire
-
2007/12/26
Re: Device node - How does kernel know about it
Jon Smirl
-
2007/12/26
Device node - How does kernel know about it
Siva Prasad
-
2007/12/26
Re: [PATCHv2] powerpc: DBox2 Board Support
Arnd Bergmann
-
2007/12/26
Re: [PATCHv2] powerpc: DBox2 Board Support
Jochen Friedrich
-
2007/12/26
[no subject]
chengk_thomson
-
2007/12/24
i2c device for a linux 2.6 in XUPV2P
Josep Maria Batlle
-
2007/12/24
Re: Loop at starting pid 164, tty '': '/sbin/getty'
Olof Johansson
-
2007/12/24
Re: [PATCHv2] powerpc: DBox2 Board Support
Arnd Bergmann
-
2007/12/24
Re: Loop at starting pid 164, tty '': '/sbin/getty'
ramkumarj Ramkumar
-
2007/12/23
Re: Loop at starting pid 164, tty '': '/sbin/getty'
Olof Johansson
-
2007/12/23
[PATCHv2] powerpc: DBox2 Board Support
Jochen Friedrich
-
2007/12/23
Re: [PATCH] powerpc: DBox2 Board Support
Jochen Friedrich
-
2007/12/23
[PATCH] powerpc: DBox2 Board Support
Jochen Friedrich
-
2007/12/22
Loop at starting pid 164, tty '': '/sbin/getty'
ramkumarj Ramkumar
-
2007/12/21
RE: [techfield] GPIO causing bus error
Elayda, Bernardo (Bernie)
-
2007/12/21
Re: GPIO causing bus error
Jeff Mock
-
2007/12/21
CONFIG_PCI interaction with pata_platform driver on MPC834x board
Johns Daniel
-
2007/12/21
Changes to Freescale I2C driver makes it stop working for us moving from 2.6.22 to 2.6.23.9
michael.firth
-
2007/12/21
MPC83xx - 2.6.23, UCC_GETH and NFS Boot
Russell McGuire
-
2007/12/20
Re: MPC885 - USB HCI drivers.
Vitaly Bordug
-
2007/12/20
Differences between git tree
Bizhan Gholikhamseh (bgholikh)
-
2007/12/20
Re: tiny login
Clemens Koller
-
2007/12/20
Re: some questions about XUP and the generation of ace file
greenlean
-
2007/12/20
Re: MPC885 - USB HCI drivers.
Jonathan Journo
-
2007/12/19
tiny login
pjmaiya
-
2007/12/19
RE: hangs after "Freeing unused kernel memory"
Siva Prasad
-
2007/12/19
tiny login
pjmaiya
-
2007/12/19
Re: some questions about XUP and the generation of ace file
greenlean
-
2007/12/19
Re: DTS files, 83xx, clock frequencies
Timur Tabi