Are you using a single 3/8" (3L) belt?
Philip
At 03:03 PM 6/2/2008, you wrote:
I've got a newer Balmar 100 amp alternator bolted onto a Volvo MD2030 and
am getting a lot of rubber dust off the balmar pulley, which is getting
sucked into the alternator.
Changed sheeves, belts match sheeves, spoke to both Balmar and Volvo, no
help there.
Tried belt dressing, have backed off amp output down to 75 amps, still
getting dust.
Any suggestions?
Thanks in advance,
Rit
_______________________________________________
Liveaboard mailing list
[email protected]
To adjust your membership settings over the web
http://www.liveaboardnow.org/mailman/listinfo/liveaboard
To subscribe send an email to [EMAIL PROTECTED]
To unsubscribe send an email to [EMAIL PROTECTED]
The archives are at http://www.liveaboardnow.org/pipermail/liveaboard/
To search the archives
http://www.mail-archive.com/[email protected]
The Mailman Users Guide can be found here
http://www.gnu.org/software/mailman/mailman-member/index.html
_______________________________________________
Liveaboard mailing list
[email protected]
To adjust your membership settings over the web
http://www.liveaboardnow.org/mailman/listinfo/liveaboard
To subscribe send an email to [EMAIL PROTECTED]
To unsubscribe send an email to [EMAIL PROTECTED]
The archives are at http://www.liveaboardnow.org/pipermail/liveaboard/
To search the archives http://www.mail-archive.com/[email protected]
The Mailman Users Guide can be found here
http://www.gnu.org/software/mailman/mailman-member/index.html
