Can anyone explain how Teleop mode is meant to be used? Is it used just for jogging?
[email protected] writes: > Hi > > I have no idea if there is a specific menu item for switching to world > mode in Cetus, like there is in Axis > > However - 'Use the Search Luke' > > http://www.machinekit.io/search-result.html?cx=013132401186084955638%3Ahpvljajpulu&cof=FORID%3A11&s=teleop+mode > > bottom search hit > > http://www.machinekit.io/docs/man/man1/halui.1/ > > from that doc > halui.mode.teleop - bit in pin - for requesting coordinated jog mode > > So halcmd setp halui.mode.teleop 1 > will set teleop mode > > Ensure that your .ini file has the stanza HALUI = halui and you can > use it > > One of the easiest ways might be to put it into a user M code > http://www.machinekit.io/search-result.html?cx=013132401186084955638%3Ahpvljajpulu&cof=FORID%3A11&s=user+M+code > > but there are umpteen ways to skin that cat > > regards > > On 17/06/16 11:54, Mathias Giacomuzzi wrote: > > Does someone know if this is available in Cetus? Or what interface > are you using for printing with a kossel. > > > By the way is here anyone in this group who using machinekit for a > Kossel to print real stuff? > > > > After quite a few weeks I am really disappointed about the bad > support for Kossel. Now I am getting almost anything to work with > the new stuff Alex made - that's really cool. > > The last thing is the switch to telop after homed but I do not > know where to start here. > > > Many thanks... for the help > > > > > > > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io > github: https://github.com/machinekit > --- > You received this message because you are subscribed to the Google > Groups "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, > send an email to [email protected]. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. -- Alexander -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
